MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Ed Caffrey's Workshop

Ed Caffrey's Workshop Talk to Ed Caffrey ... The Montana Bladesmith! Tips, tricks and more from an ABS Mastersmith.

Reply
 
Thread Tools Display Modes
  #1  
Old 04-16-2021, 04:42 PM
Ed Caffrey's Avatar
Ed Caffrey Ed Caffrey is offline
Super Moderator
 
Join Date: Jun 2002
Location: Great Falls, Montana, USA
Posts: 4,298
Send a message via AIM to Ed Caffrey Send a message via Yahoo to Ed Caffrey
How to wire/control two motors to one VFD

There are a lot of cautions and warnings in this article! FIRST: I am not responsible if you destroy something attempting this modification!
**I highly recommend using the EXACT same MODEL/HP motors. I suspect if you don't, you're likely going to destroy/burn up something.

**I know this works with KBAC VFDs.... I would not recommend trying it with any of the el-cheapo VFDs! You'll likely end up in a Blaze of Glory.....literally!

http://www.caffreyknives.net/1_vfd_2_motors.html


__________________
WWW.CAFFREYKNIVES.NET

Caffreyknives@gmail.com

"Nobody cares what you know.....until they know you care."
Reply With Quote
Reply

Tags
blaze, how to, vfd


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
It's getting out of control....and it's just sad Ed Caffrey Ed Caffrey's Workshop 46 01-13-2012 09:56 AM
Dust control? Shankmaker The Newbies Arena 1 12-28-2008 09:18 AM
Furnace control TJ Smith The Supply Center 4 02-19-2006 11:32 AM
quality control on the ddrs bl casper Knife Kits Forum 3 12-04-2005 10:13 PM
Testing 1-2-3 (quality control) Mace Knife Making Discussions 2 09-27-2003 09:38 AM


All times are GMT -5. The time now is 04:25 PM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved