|
|
The Damascus Forum The art and study of Damascus steel making. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
The BATSON press
Planning on building a press.
I noticed that in Jim Batson's book he specs a 2 hp motor, a 5 inch cyl, with a 5.5 gpm pump. is this gonna work? puts out 24-25 tons. TJ __________________ TJ Smith Knifemaker |
#2
|
|||
|
|||
Batson press ad
Build Your Own Hydraulic Forging Press
Batson, James Availability: In stock. $30.00 Quick Overview This book and drawings are designed to help you build your own 24 ton Hydraulic Forging Press. A two horsepower 220 volt single phase motor running at 1725 RPM powers a 5.5 gallon per minute "Hi-Lo" hydraulic pump. Ram force of 24 tons is applied by a 5" diameter double acting hydraulic cylinder at 2500 psi pressure. The movement of the ram die is controlled by a 4 way, 3 position hydraulic valve. The length of the ram stroke is 8". The maximum speed of the ram is 1.1 inches per second. The ram speed can be doubled by using a 5 horsepower electric motot running at 3600 RPM. If this works, why are so many advising 5hp mtrs and 16 gal pumps? TJ __________________ TJ Smith Knifemaker |
#3
|
||||
|
||||
Quote:
Gary __________________ Gary ABS,CKCA, ABKA,KGA |
#4
|
|||
|
|||
Gary A 2 hp mtr with 1725 RPM and a 5 gpm pump??????
__________________ TJ Smith Knifemaker |
Tags |
build, building, forging, motor, press |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Batson hammerin? | Coutel | The Outpost | 7 | 01-21-2005 09:54 AM |
Batson Syposium - Who is Going? | Laredo7mm | The Outpost | 0 | 03-08-2004 11:59 AM |
batson symposium | Robert Washburn | The Outpost | 3 | 04-08-2003 04:20 PM |
batson hammer in | paul harm | The Outpost | 27 | 04-02-2003 07:49 PM |
Going to the Batson Bladesmith Symposium? | Hillbillenigma | Knife Making Discussions | 0 | 03-16-2001 07:17 PM |