MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Knife Making Discussions > The Newbies Arena

The Newbies Arena Are you new to knife making? Here is all the help you will need.

Reply
 
Thread Tools Display Modes
  #1  
Old 07-22-2010, 05:19 PM
schwatk schwatk is offline
 
Join Date: May 2010
Location: Alpine, CA.
Posts: 9
Vertical Forge & Billet Question

I am just starting to try my hand at forge welding Damascus/Pattern Welded billets. I have one of Darren Ellis's 8" vertical forges on the way. One question I have from my reading of books and forums concerns the billet while it is in the forge. Many people apparently weld a rebar handle to it. And this suspends the billet in the vertical forge. While others like Dr. Jim Hrisoulas wire the billet together and just set it in their horizontal forge without a handle. If I wanted to wire my billet together instead of welding on a handle how could I suspend the billet in my vertical forge?

I'm sure this will be the first of many questions I will be posting in the future.

Thanks for any and all help!

Joe
Reply With Quote
  #2  
Old 07-22-2010, 05:39 PM
Ray Rogers's Avatar
Ray Rogers Ray Rogers is offline
Founding Member / Moderator
 
Join Date: Jun 2002
Location: Wauconda, WA
Posts: 9,816
You'd need some kind of support in the forge...some steel bars or something for the billet to sit on. Ellis' forge may have something in it for that purpose, most guys put something in for the work to sit on. Whatever is used, it will probably have to be replaced periodically since steel bars would burn away or sag after a while. Or, you could make your billet long enough that it could sit on the sides of the foge inside the doors.

This type of situation is why I never bothered to build a vertical .......


__________________

Your question may already have been answered - try the Search button first!






Reply With Quote
  #3  
Old 07-22-2010, 09:23 PM
Woodchuck Forge's Avatar
Woodchuck Forge Woodchuck Forge is offline
Skilled
 
Join Date: Feb 2004
Location: Salem Oregon
Posts: 634
I posted a response on your other post irt this subject.


__________________
http://www.woodchuckforge.com
Avatar, Scott Taylor Memorial Scholarship Knife
Photo by Bob Glassman
Chuck Richards ABS J.S.
Reply With Quote
Reply

Tags
damascus, forge


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Vertical Forge & Billet Question schwatk Ed Caffrey's Workshop 2 07-23-2010 09:09 AM
New vertical forge B.Finnigan The Outpost 16 07-01-2007 01:23 AM
1095/nickel billet question David Peterson The Damascus Forum 15 10-07-2004 02:53 PM
vertical forge question Evgeny_G65 Ed Caffrey's Workshop 1 09-30-2003 01:17 PM
Vertical Forge BCB27 Ed Caffrey's Workshop 6 04-29-2001 01:57 PM


All times are GMT -5. The time now is 04:58 AM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved