|
|
The Newbies Arena Are you new to knife making? Here is all the help you will need. |
|
Thread Tools | Display Modes |
#2
|
||||
|
||||
Pop sells them for $85
Joe |
#3
|
||||
|
||||
Not sure about that one but I used the bottom of my Pana-Vise for part of the swivel. The vise jaws swivel on a simple bolt which is probably about the same as the one on eBay...
http://www.rayrogers.com/knifevise1.jpg http://www.rayrogers.com/knifevise2.jpg |
#4
|
|||
|
|||
Thats pretty neat. Ive had pretty good luck with my little bench vise I got for $2 at a yard sale, and a C clamp. Like I say about every other cool tool..............One of these days.
__________________ Zen R. ZCR Knives West Central Connecticut |
#5
|
||||
|
||||
Quote:
|
#6
|
||||
|
||||
#7
|
||||
|
||||
[IMG][/IMG]
Here is a vise I made after seeing a similar one in Blade mag. __________________ Bearpaw |
#8
|
||||
|
||||
Texas Knife Supply sell one also that is very similar to the one you posted. I think theirs is in the range of Pop's as well.
I just made one the other day out of 2" square tubing and some 3/8" bolts for tensioners and a few pieces of red oak. Haven't used it yet, but looking at some, thought, "man, I need one of those.....what for I don't know, but I need one..." __________________ Dennis "..good judgement comes from experience, experience comes from poor judgement.." -Gary McMahan, a cowboy poet and good dancer. http://www.facebook.com/home.php#!/p...24112090995576 |
#9
|
||||
|
||||
Put on the coffee table as a conversation starter!
__________________ Bearpaw |
#10
|
|||
|
|||
Bearpaw what size are those pipes you used?
Doug Jn. 3:16 |
#11
|
||||
|
||||
Doug, the dimensions are I.D.: outside pipe 2.5" / inside pipe 2". The nice thing about this design, you can rotate the inner tube and lock it at whatever area you want to work on the handle.
__________________ Bearpaw |
#12
|
|||
|
|||
If you want it to swivel horizontally, basically you can just take the same idea of inner and outer pipes but weld it on the bottom 90 degrees to the main vise body.
|
#13
|
||||
|
||||
I swivel the base of the vice the knife vise is in. Your idea would be nice too.
__________________ Bearpaw |
#14
|
|||
|
|||
Poor Boy's on Ebay has a better price than that. He makes a couple of models. You do have to provide the wood "jaws" to go inside the clamp, however.
Doug Lester __________________ If you're not making mistakes then you're not trying hard enough |
Tags |
blade, knife |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|