MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > The Outpost

The Outpost This forum is dedicated to all who share a love for, and a desire to make good knives, and have fun doing it. We represent a diverse group of smiths and knifemakers who bring numerous methods to their craft.

Reply
 
Thread Tools Display Modes
  #1  
Old 08-13-2006, 02:14 PM
nc_cooter's Avatar
nc_cooter nc_cooter is offline
Steel Addict
 
Join Date: Oct 2004
Location: Grover,NC
Posts: 274
New Anvil

I bought a NC Tool big face anvil at an estate sale this w.e. It is in new condition, bought new and never used. It's only 70 lbs, but i figure I can add a big chunk of scrap under the base and get it near 150 lbs total and use it till I find something better. Only cost $100. I know it will be better than the RR track I have now.




__________________
Mike Broach
Knives made to be used.
Reply With Quote
  #2  
Old 08-13-2006, 03:37 PM
toddhill toddhill is offline
Master
 
Join Date: Jan 2006
Location: Arizona
Posts: 827
Looks pretty sweet, Mike. A heavier base will really help out. Unless you're doing some pretty heavy duty forging, that anvil will do well. Sure better than the old RR track. That's what I started out with and I don't miss it a bit.
Reply With Quote
  #3  
Old 08-13-2006, 04:00 PM
Drunkenduck Drunkenduck is offline
Steel Addict
 
Join Date: Feb 2006
Location: Portsmouth, VA
Posts: 139
Send a message via ICQ to Drunkenduck
Thumbs up

Looks good. My first anvil, which I still have is 66#. I leveled a heavy cobble stone to set it on to bring the weight up. On top of that, my anvil stand is a stack of solid concrete end caps. I got one of those cheap 110# numbers off and Ebay site to replace it just in case I wanted to do some serious metal moving again like flattening out 1" W1 round bar. From the looks of it, I'd say it's a farriers model because of the narrow waist and the turning clips on the side. Can't tell real well from the picture but does it have wings between the cutting plate and the horn? One thing that got me when I was researching what I needed to get into this game how some of the "experts" said that you needed a top grade anvil, preferably 150# or better, to forge on. Then immediately after listing all the things that were wrong with farrier/bench/ecno anvils they'd tell you how to make an anvil out of a chunk of railroad track. That's a pretty tool, treat it right and I'm certain that you'll get a lot of good use out of it; I'm happy that you were fortunate enough to find it.

Doug Lester
Reply With Quote
  #4  
Old 08-14-2006, 04:44 PM
C.M. Arrington C.M. Arrington is offline
Skilled
 
Join Date: Jun 2002
Location: Rome, Georgia
Posts: 321
I've had the newer version of that anvil for about 5 years. I think you'll like it.
Reply With Quote
  #5  
Old 08-14-2006, 08:59 PM
Drunkenduck Drunkenduck is offline
Steel Addict
 
Join Date: Feb 2006
Location: Portsmouth, VA
Posts: 139
Send a message via ICQ to Drunkenduck
I just ran into an add for NC anvils and they still are carring that model. The price you paid for it was a steal. I hope you lit a candle to the deity of your choice.

Doug Lester
Reply With Quote
  #6  
Old 08-15-2006, 04:29 AM
nc_cooter's Avatar
nc_cooter nc_cooter is offline
Steel Addict
 
Join Date: Oct 2004
Location: Grover,NC
Posts: 274
I know it has taken almost two years to find an anvil locally. A new anvil was way out of my price range. Even ran an ad in the local news rag for 3 weeks.
Almost didn't go to the sale. This was the only blacksmith item . talk about luck of the draw!


__________________
Mike Broach
Knives made to be used.
Reply With Quote
  #7  
Old 06-01-2008, 06:52 PM
Carcar?_BR's Avatar
Carcar?_BR Carcar?_BR is offline
Skilled
 
Join Date: Aug 2006
Location: Campo Grande, Mato Grosso do Sul, Brasil
Posts: 453
Send a message via MSN to Carcar?_BR
Well guys, I really need some help here.
There?s three years that I?m looking after an good anvil.
yesterday I found one, 60kg but infortunally when I saw the picture of it I saw that it?s not a good anvil, because it haves a soft plate.

But how it is by a nice price and have weight enough, I?m thinking in fix a new plate on it, maybe 1045 steel or other, so I put more weight and when it becomes bad I just take it off and change the plate.

Here are my questions: How thick do you guys think that must be this new plate, what would be a good material and what?s going to be the better way to fix that plate on the anvil?

Thank?s!


__________________
Sauda??es Pantaneiras
O Mato Grosso do Sul tamb?m est? por aqui.

Costa Marques {Carcar?.BR}
"Ver?s que um filho teu n?o foge a luta"
MVB: 1781
Reply With Quote
Reply

Tags
forge, forging


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 01:50 PM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved