Custom Knives | Other Knives | General Items
New Posts | New PhotosAll Photos

Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > The Outpost

The Outpost This forum is dedicated to all who share a love for, and a desire to make good knives, and have fun doing it. We represent a diverse group of smiths and knifemakers who bring numerous methods to their craft.

Thread Tools Display Modes
Old 07-06-2007, 09:12 PM
Adlai Stein's Avatar
Adlai Stein Adlai Stein is offline
Steel Addict
Join Date: Apr 2006
Posts: 149
Send a message via AIM to Adlai Stein
City Boy Anvil Stump

Living in the burbs I had hard time finding an old tree stump for my anvil. I had found one but it was a bit short as I pulled it out of someone's fire wood pile instead of being able to cut it to the right size myself.

I had some old 2 X 4's and plywood laying around my garage from other projects so I pieced them together into the anvil stand seen in the pictures below. I cut the plywood for the top into 1' X 1' squares and then cut the 2 X 4's in to 1' lengths. The stand is held together with dozens of wood screws also left from another project. I put screws in from both sides so that it was secure and built it up from both sides. Then alternated each row of 2 X 4's screwing them into the bottom. My daughter calls it the giant Jenga. It's not pretty but it is effective.

If you don't have the scrap sitting around it shouldn't cost you more than $25.00 for the lumber at Lowe's.

Adlai Stein
Macabee Knives
Reply With Quote
Old 07-07-2007, 05:43 AM
nc_cooter's Avatar
nc_cooter nc_cooter is offline
Steel Addict
Join Date: Oct 2004
Location: Grover,NC
Posts: 274
Way to go! When you don't have what you want, improvise. I made my "stump" from squares of MDF, glued and then spar varnished.

Mike Broach
Knives made to be used.
Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

All times are GMT -5. The time now is 04:29 PM.

Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved