View Single Post
  #6  
Old 04-14-2021, 11:11 PM
jimmontg jimmontg is offline
Guru
 
Join Date: Jan 2016
Location: Now live in Las Cruces NM.
Posts: 1,323
I might add that I made a transfer punch out of a small round center punch by chucking it up into my drill gun and grinding the tip to 3/16 (.187) for about .200 from the tip and I'd make a transfer punch jig out of one of my spare parts. Works right on the money today as long as I'm accurate with the pilot holes.
Reply With Quote