View Single Post
  #6  
Old 11-07-2003, 09:46 PM
navajas navajas is offline
Steel Addict
 
Join Date: Jun 2002
Location: Bakersfield, Calif.
Posts: 223
drilling

What thickness steel are you going to be drilling?. If it,s 1/4" or thinner you can use a standard hole drill with pilot drill on it. After you drill the hole, then smooth it up with a 3/4" or 1" drum type sander on your drill press. to take the edge of use a deburring tool. (hand held type).
Reply With Quote