View Single Post
  #4  
Old 12-03-2020, 02:55 PM
Doug Lester Doug Lester is offline
Hall of Famer
 
Join Date: Sep 2006
Location: Decatur, IL
Posts: 2,612
It would be slow going and possibly a little uneven. Another thing that you could use is a buffing wheel mounted in a hand drill or drill press. if you use a hand drill you would need to tape up the blade and clamp it in a vice. If on a drill press you must, and I mean must, hold the knife where the wheel turns away from you to protect against the wheel grabbing the knife and hurling it at you .

Doug


__________________
If you're not making mistakes then you're not trying hard enough

Last edited by Doug Lester; 12-03-2020 at 02:58 PM.
Reply With Quote