View Single Post
Old 05-20-2001, 08:02 PM
Posts: n/a
Re: Sand paper seconds

Yup Max, sorta. I have used several layers of masking tape on the back of the paper. The 3/4 inch wide tape is about the right width for the strip. I have used chunks of cheap oil stones for working blades down by hand. Works fine, but of course slow compared to gringding. I layes the oil stones on something solid and hit them with a cold chisel and a heavy hammer. They will sort of break on a straight line. Yea, sanding is hard on the hands. I have a little leather covered block about 1.25 x 2 that I use A lot for sanding with wet/dry paper.
Reply With Quote