The Knife Network Forums : Knife Making Discussions

The Knife Network Forums : Knife Making Discussions (http://www.knifenetwork.com/forum/index.php)
-   Ed Caffrey's Workshop (http://www.knifenetwork.com/forum/forumdisplay.php?f=10)
-   -   If you're new to my forum.... here are some helpful links! (http://www.knifenetwork.com/forum/showthread.php?t=69565)

Ed Caffrey 04-23-2021 11:05 AM

If you're new to my forum.... here are some helpful links!
 
Welcome to KN folks! I've been here since the forums beginnings. I have extensive experience with Bladesmithing and making Damascus. I'm an ABS Mastersmith, with 30+ years of Bladesmithing experience. If you have question ask away, and I'd be happy to answer. I certainly don't know it all, but if I can't answer it, I will do my best to either find and answer for you, or direct you in the right direction. ;)

You can find a lot of info on my website:http://www.caffreyknives.net/

and lots of Damascus pics/knives that I've produced here: https://ibb.co/album/w0PcdN?sort=dat...N&seek=SsCPP7x

If you're far enough along that you're interested in Bladesmithing classes.... I can help there too..... http://www.caffreyknives.net/classes.html

You can find many Bladesmithing/Knifemaking videos and tools at KnifeMakerTraining: https://knifemakertraining.com/

We also have a Facebook page for KnifeMakerTraining: https://www.facebook.com/knifemakertraining/

And finally, a Facebook group for Bladesmithing/Knifemaking training/Q&A: https://www.facebook.com/groups/1502440453149021/


All times are GMT -5. The time now is 01:28 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved