MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Knife Making Discussions > Fine Embellishment

Fine Embellishment Everything from hand engraving and scrimshaw to filework and carving. The fine art end of the knifemaker's craft.

Reply
 
Thread Tools Display Modes
  #1  
Old 09-23-2004, 09:42 AM
Don Cowles's Avatar
Don Cowles Don Cowles is offline
Founding Member / Moderator
 
Join Date: Jun 2002
Location: Royal Oak, Michigan
Posts: 2,192
Send a message via AIM to Don Cowles
Etching technique

This is posted in response to Jim Small's question on how Antonio does his etching.

ETCHING.
Friend Jim Small :
First off, I thank you for you interest in my work and how I do the etching (you asked me my technique). I won?t offer a definition of ?etching?, because the definition is in any dictionary or encyclopedia.

The art of etching has come to me through my family. My late father was an acid etcher before me. He passed on to me the basic knowledge, and I began investigating new techniques.

Although I have the title of ?Master Engraver?, I consider myself to be an apprentice, since I continue to learn new things every day. The technique that I use is the traditional one of the XIX century; it was handed down from engraver to engraver until the present.

I can etch all the metals that I know of in Spain (silver, gold, brass, German nickel, copper, zinc.....) but mainly, what I etch is the stainless steel of knife blades. The more rich in carbon the steel is, the better it will etch. You use a lot of steels rich in carbon, such as ATS - 34. Although we don?t use it in Spain, it should etch very well.

Basic technique :
It is necessary to degrease the metal well to etch. There are commercial degreasers (cleaning products) available in the market, but ethyl alcohol and household detergents are useful as well.
Next comes the drawing on the metal. There are many inks for engraving in the market; the composition is similar (they are all formed with asphalt and virgin wax). With testing, very good inks can be found.

I draw directly with the ink on the metal. To do this, one requires a mastery of drawing and a steady hand.

The acid that I use is usually nitric acid. There are different types of acids used for etching, but the characteristics of the nitric make it the one that I usually choose. It is quite aggressive with metals, and its way of etching is more violent (compared with other acids). They don?t usually advise it for fine and delicate works, but I personally control it quite well and I carry out very delicate works.
All my works are usually with nitric.

One can etch in ?low relief?, where the drawing is etched into the background, but I most often use the technique of engraving in ?high relief?. In this technique the drawing stands proud of the background.

When the metal is submerged in the acid. I should be concentrating on the corrosion of the acid. There are multiple factors that influence the action of the acid, such as the ambient temperature and the content of humidity in the atmosphere. The action of the acid is sometimes unpredictable, so it is not wise to walk away from the process and allow the acid to work unsupervised. We have to watch closely to stay on top of the process.

I should also say that, with the acid, other materials can be etched besides metals; it is a question of carrying out many tests. I will send some pictures of some engravings so that you can see them.

A greeting from Montejano.

The following pictures are step-by-step documentation of an etching job done by Antonio.















__________________


Don Cowles Custom Knives

Reply With Quote
  #2  
Old 09-23-2004, 04:05 PM
Montejano's Avatar
Montejano Montejano is offline
Master
 
Join Date: Jul 2004
Location: Spain
Posts: 934
Quiero agradecer a Don Cowles su ayuda constante cuando se le necesita .Gracias por tu tiempo invertido en el foro .

Un abrazo .

Montejano .

-------------------------------------------------------

I want to thank Don Cowles their constant help when he/she is needed. Thank you for your time invested in the forum.

A hug.

Montejano.
Reply With Quote
  #3  
Old 09-23-2004, 10:11 PM
Jim Small's Avatar
Jim Small Jim Small is offline
Moderator
 
Join Date: Jun 2002
Location: Madison, Ga
Posts: 741
Antonio

What a nice surprise.....

I want to thank you for your fine tutorial on etching. Now all I have to do is fine some of those pens. I think I can speak for the other friends on this forum when I say your works is beautiful....I especially want to thank you and Don for posting the above photos...."a picture is worth a thousand words".
Thank you for your help

Jim
Reply With Quote
  #4  
Old 09-23-2004, 11:47 PM
Shakudo's Avatar
Shakudo Shakudo is offline
Skilled
 
Join Date: Nov 2003
Location: Minnesota
Posts: 672
the pens appear to be a standard calligraphy type quill tips. just your basic dip and draw ink pens . it appears everything you need is at your local dick blick art supply store.
Reply With Quote
  #5  
Old 09-24-2004, 03:44 AM
Montejano's Avatar
Montejano Montejano is offline
Master
 
Join Date: Jul 2004
Location: Spain
Posts: 934
Gracias amigos . Para mi es un placer mostrar trabajos .Me gustar?a que los miembros participaran m?s en el foro de Fine Embellishment ;
estoy convencido de que se realizan muy buenos trabajos de adorno , grabado , etc ...y estos trabajos enriquecen m?s nuestro foro .

Un saludo a todos .

Montejano .

----------------------------------------

Thank you friends. For my it is a pleasure to show works. I would like that the members participated more in the forum of Embellishment it Dies ;
I am convinced that they are carried out very good decoration works, engraving, etc... and these works enrich more our forum.

A greeting to all.

Montejano.
Reply With Quote
  #6  
Old 09-25-2004, 10:47 PM
Hot&CoaledForge Hot&CoaledForge is offline
Skilled
 
Join Date: Mar 2004
Location: NW Arkansas
Posts: 317
I also wish to thank you for the tutorial, Antonio. I am always overwhelmed by your work - it is amazing! - Jim
Reply With Quote
  #7  
Old 09-26-2004, 09:29 AM
Lloyd Hale Lloyd Hale is offline
Skilled
 
Join Date: Oct 2002
Location: Lynnville Tenn.
Posts: 317
Acid etching

Great thread and very informative .... Thanks Guys.... I just love this Forum...!!


__________________
Lloyd Hale
Reply With Quote
Reply

Tags
knife


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 11:53 AM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved