MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Ed Caffrey's Workshop

Ed Caffrey's Workshop Talk to Ed Caffrey ... The Montana Bladesmith! Tips, tricks and more from an ABS Mastersmith.

Reply
 
Thread Tools Display Modes
  #1  
Old 08-28-2014, 11:12 AM
J. Doyle's Avatar
J. Doyle J. Doyle is offline
Skilled
 
Join Date: Jan 2010
Location: Gladwin, MI
Posts: 337
I finally made a folder!

I've been working on these on and off for a while now. I finally got one finished. This is my second folder to date and it's the first one I've made in my own shop. I took a class with my good friend and mentor,MS Jon Christensen a few years ago and made my first one there in his shop. I also wanted to say thanks to my other good friends Bing and Ed Caffrey. These three guys really helped me out with getting these folders underway.

Nothing revolutionary or groundbreaking here. I just wanted to make a nice straightforward, practical, working/utility folder.This one is light and slim but still plenty stout for a folder.

Specs:
80CrV2 steel
7" open, 4" closed, 2 7/8" of actual sharp edge, .114" thick
Full distal taper in the blade
Blade has a 800 grit hand sanded finish
Rounded spine
Black g-10 scales
.060" thick titanium liners, jeweled
3/16" hardened steel pivot with titanium pivot screws
Titanium handle scale screws
Good, solid lockup and strong detent retention

Any and all comments, questions, critique and opinions welcome.

















__________________
John Doyle

You have nothing to fear but fear itself...........and bears.
Reply With Quote
  #2  
Old 08-28-2014, 01:55 PM
Don Robinson's Avatar
Don Robinson Don Robinson is offline
Moderator
 
Join Date: Jan 2003
Location: Brownsville, Texas
Posts: 4,835
Congrats, John! Looks like you've learned your lessons well.
Reply With Quote
  #3  
Old 08-28-2014, 02:40 PM
miketheknife's Avatar
miketheknife miketheknife is offline
Steel Addict
 
Join Date: Dec 2012
Location: High Point, NC
Posts: 196
I like the clean lines. Very nice!
Reply With Quote
  #4  
Old 08-28-2014, 09:40 PM
Ed Caffrey's Avatar
Ed Caffrey Ed Caffrey is offline
Super Moderator
 
Join Date: Jun 2002
Location: Great Falls, Montana, USA
Posts: 4,169
Send a message via AIM to Ed Caffrey Send a message via Yahoo to Ed Caffrey
Awesome John! Now for the bad news.......YOUR HOOKED! Folders are the one type of knife that will just plain "drive" you.....just when you think you've got them all figured out, some "little" thing pops up and drives you to make another.

Seems like I go in "spurts" when it comes to folders......won't make any for a while, then get the bug and make a bunch....and by the time I have that bunch done I'm usually pulling my hair out (well figuratively) fixing "bugs". And the cyle just keeps repeating itself.....that's what I mean by "drive".


__________________

www.caffreyknives.net
EdCaffreyMS@caffreyknives.net
"Nobody cares what you know.....until they know you care."
See me at table 2Q at the Blade Show!
Reply With Quote
  #5  
Old 08-29-2014, 06:15 AM
MLAZYB's Avatar
MLAZYB MLAZYB is offline
Skilled
 
Join Date: Dec 2006
Location: Spring Creek Nv
Posts: 458
As Ed just said. Just when you think you got it. Something else will rare it head and say nope you need to go back and start over!!!!!! Love to folder you did here pal it has a certain John Doyle look to it as well. Thanks for the tip on the makers mark as well. I going to try that on the one I'm working on.

Bing


__________________
Bruce Bingenheimer
MLazyB Custom Knives
ABS Journeyman Smith
Reply With Quote
  #6  
Old 08-29-2014, 11:34 AM
Jeremy Jeremy is offline
Steel Addict
 
Join Date: Jun 2011
Location: Idaho
Posts: 234
Loving this, John. I agree with Bing-a certain John Doyle feel to it. I very much look forward to seeing more of these and am willing to bet a LOT of people will like them .

Out of curiosity, what type of stop pin did you use? Is it behind the spine and the tang runs into it or is it a track milled out of the blade (if that makes sense...)?

Jeremy
Reply With Quote
  #7  
Old 08-29-2014, 01:21 PM
ATalley's Avatar
ATalley ATalley is offline
Skilled
 
Join Date: Mar 2012
Location: Greenwood IN
Posts: 324
Very nice, John. I really like the straight forward, strong, slim design of it. I only wish I had more time to attempt it myself!

As usual,nice job Sir.

Alex


__________________
AT

"We shall walk with a walk that is measured and slow,
And watch where the chalk-white arrows go
To the place where the sidewalk ends." Shel Silverstein
Reply With Quote
  #8  
Old 08-29-2014, 02:43 PM
pcpc201 pcpc201 is offline
Steel Addict
 
Join Date: Apr 2014
Location: South Alabama
Posts: 118
Exceptional!!!
Reply With Quote
  #9  
Old 08-30-2014, 08:38 AM
J. Doyle's Avatar
J. Doyle J. Doyle is offline
Skilled
 
Join Date: Jan 2010
Location: Gladwin, MI
Posts: 337
Thanks guys. There are definitely more in the works.

Jeremy, it's a hidden stop pin with a track in the blade.


__________________
John Doyle

You have nothing to fear but fear itself...........and bears.
Reply With Quote
Reply

Tags
art, awesome, back, bee, blade, chris, design, edge, folder, hand, handle, john, knife, knives, made, make, mentor, pivot, rare, sharp, shop, tang, titanium


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Finally!!Made My Own dave Stifle The Sheath/Holster Makers Community Forum 4 11-10-2008 07:41 PM
Finally made a guillotine Robert Dark The Outpost 15 12-16-2006 07:07 PM
finally made it Gene Chapman The Outpost 10 04-18-2006 09:16 PM
Finally made it... Sufler Randall Knives "Off topic" 9 08-04-2005 08:25 PM
Finally got a couple of knives made. JUNGIANEINSTEIN The Newbies Arena 0 04-19-2005 10:36 PM


All times are GMT -5. The time now is 08:27 PM.




KNIFENETWORK.COM
Copyright © 2000
CKK Industries, Inc. All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved