|
|
The North Carolina Custom Knifemakers Guild Forum The North Carolina Custom Knifemakers Guild. Raising the general awareness of custom knives and the people who make them. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
North Carolina Knife Maker James M Wade
Hello all,
I am trying to locate a N.C knife maker James M Wade. His last known address was Rt#1 Box 56 Wade North Carolina 28395. The phone # now belongs to a different gentleman and I have drawn a blank locating this craftsman. Any help would certainly be appreciated. I am attaching a picture of one of his knives, the brass has turned over the years but you can still see the quality of this mans work. Any help, direction, or articles regarding Mr Wade would again be appreciated. Thanks in advance and God bless. r.cordell Tried to post picture but????????? Again any help would be appreciated. r.cordell |
#2
|
||||
|
||||
There is a James Wade in the Canadian Knifemakers guild
|
#3
|
|||
|
|||
Quote:
__________________ Barry Jones Knives |
#4
|
||||
|
||||
Wade Knife Pictures And Heads Up On Canadian Wade
Hi Barry & ranger1,
Barry thank you again for offering to post the pictures. I sent them about 4 hours ago to your email address. ranger1 I am heading to the Canadian Knife Makers Guild right now. Take care, thank you both, and God bless. r.cordell |
#5
|
||||
|
||||
There is a James M Wade in Wade NC. He has a trucking co.
Their phone # is 910-483-3548 I hope this is your guy. |
#6
|
|||
|
|||
Judging by the pics you emailed me I'd say Andy is spot on.
Nice knife __________________ Barry Jones Knives |
#7
|
|||
|
|||
I remember seeing this maker at the Raleigh Gun Show (at the Fairgrounds) quite a few times. He does fantastic work, very clean. Not sure if he still sets up there or not. Might be worth a look, though.
__________________ Barry Jones Knives |
#8
|
||||
|
||||
r.cordell,
Just got off the phone with Mr.Wade. That is your man and the phone # is correct. He is still making knives in limited #s and said he would enjoy talking with you. Hope this helps. again his # is 910-483-3548 |
#9
|
||||
|
||||
Wade Knife
Andy & Barry,
Thanks again for all your help with finding Mr Wade! When I wrote down the telephone # I wrote down 918 instead of 910!!!!!!! It is heck getting senile!!!!!!!! Anyway I called James today and left a message, unfortunately he returned the call after I left home for a political rally. The good part is he wants to talk with me about the knife and who knows maybe another one!!!! Thanks again for all the help, and God bless. r.cordell |
#10
|
|||
|
|||
Glad I could be of help to you.
__________________ Barry Jones Knives |
#11
|
||||
|
||||
You are most welcome.
|
#12
|
|||
|
|||
Myers Wade is a very fine Knifemaker and have known him for about...
30 years. He was a machinist with Black & Decker until the plant here in Fayetteville closed. He was inspired by his co-worker, John Wagaman, who lived in Fayettevile, and now retired, living in Selma, NC where he operates the "Railroad Antique Shop".
John & Myers inspired & assisted about a dozen knifemakers getting started in the Fayetteville region. They were especially helpful to servicemen stationed at Fort Bragg over the decades. Among the soldier/knifemakers were the late MSG Bob Horrigan, whose twin brother, John,(TX), still continues to show at the Blade Show, Gary Wheeler, MSG RET, now hooked up with Kim Breed near Ft Campbell; Jerry Firebaugh, 3rd SFG(A)Gulf War I, & Bob Howes, CPT USA. Myers Wade & John Wagaman have been instrumental in keeping custom knifemaking going in NC. They are not alone in this, but they worked with me and I am proud to be a small part of their success, selling their knives in my old store from 1972 to 1999. Buck Buchanan Fayetteville Arms Room (Formerly Cumberland Knife & Gun Works, Inc) Fayetteville, NC 28303 Buck100-10x@nc.rr.com (910) 977-6200 |
Tags |
blade, knife, knives |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|