The Display Case A place to post your latest knives and creations. Let the Knife Network community see your work first! |
![Old](images/statusicon/post_old.gif)
04-12-2020, 10:20 AM
|
Enthusiast
|
|
Join Date: Jul 2019
Location: Austin Texas
Posts: 81
|
|
Latest attempt at a kitchen knife
My last couple. Both another attempt at a good kitchen knife. These both came out way better then any of the others. Grinds and handles both came out pretty good. And most importantly, cut nice. Both are 154CM 3/32 x 1 1/2. Olive wood and brass and walnut with brass and copper.
Gonna keep working at, trying new things. Gotta go back to You Tube and find some good handle grinding techniques. Stay safe everyone.
|
![Old](images/statusicon/post_old.gif)
04-12-2020, 09:35 PM
|
Guru
|
|
Join Date: Jan 2016
Location: Now live in Las Cruces NM.
Posts: 1,345
|
|
Beautiful knives. You did a good job Tex.
|
![Old](images/statusicon/post_old.gif)
04-12-2020, 11:00 PM
|
Enthusiast
|
|
Join Date: Jul 2019
Location: Austin Texas
Posts: 81
|
|
Thank you sir.
|
![Old](images/statusicon/post_old.gif)
04-16-2020, 09:55 AM
|
![rockhound's Avatar](image.php?s=a9a813de6dd5023318913f681dd30f00&u=29692&dateline=1580741926) |
Skilled
|
|
Join Date: Jun 2012
Location: Winter Park, CO
Posts: 366
|
|
Nice! I like the hand rub finish on 154CM, what grit did you take them down to?
__________________
Stay away from fast women and slow horses
|
![Old](images/statusicon/post_old.gif)
04-16-2020, 07:31 PM
|
Enthusiast
|
|
Join Date: Jul 2019
Location: Austin Texas
Posts: 81
|
|
Quote:
Originally Posted by rockhound
Nice! I like the hand rub finish on 154CM, what grit did you take them down to?
|
Thank you. I took these to 800. I do everything by hand now. My equipment is all hobby grade. Making it work though. I really like your knifes so don’t be surprised if I make an amateur attempt. Thanks again for your feedback.
|
![Old](images/statusicon/post_old.gif)
04-17-2020, 09:55 PM
|
![M&J's Avatar](image.php?s=a9a813de6dd5023318913f681dd30f00&u=4388&dateline=1145693367) |
Master
|
|
Join Date: Dec 2004
Location: So. Cal
Posts: 893
|
|
Nice work! Looking good!
__________________
Mike
|
![Old](images/statusicon/post_old.gif)
04-18-2020, 07:06 AM
|
Enthusiast
|
|
Join Date: Jul 2019
Location: Austin Texas
Posts: 81
|
|
Quote:
Originally Posted by M&J
Nice work! Looking good!
|
Thank you
|
![Old](images/statusicon/post_old.gif)
04-26-2020, 12:12 PM
|
Enthusiast
|
|
Join Date: Dec 2013
Location: Durham, NC
Posts: 42
|
|
First off, I absolutely agree with the others - Nice Work.
One thing to consider, given that it is a kitchen/chef's knife, would be to pull the plunge grind back rearward towards the handle so that you do not have the ricasso coming down to the blade edge. The heel section of the blade is commonly used for chopping and other fine work. If you sharpen the blade a few times you will get to the point where that ricasso will prevent the blade edge at the heel from sitting flat on a cutting board and you will not be able to chop with this section.
The taper on the forward section of the handle looks spot on. You may consider moving that front bottom pin up a bit so you can round out the transition from handle to the back of the blade. Apparently a common grip that chefs sometimes use for fine work is a "pinch grip". This is where you to choke up on and pinch the blade ahead of the handle between index finger and thumb. Then the side of one of the other fingers will rests in that transition area to provide control.
Good luck,
-bill
__________________
-bill rankin
Last edited by Wrankin; 04-26-2020 at 01:37 PM.
|
![Old](images/statusicon/post_old.gif)
04-26-2020, 07:37 PM
|
Enthusiast
|
|
Join Date: Jul 2019
Location: Austin Texas
Posts: 81
|
|
Quote:
Originally Posted by Wrankin
First off, I absolutely agree with the others - Nice Work.
One thing to consider, given that it is a kitchen/chef's knife, would be to pull the plunge grind back rearward towards the handle so that you do not have the ricasso coming down to the blade edge. The heel section of the blade is commonly used for chopping and other fine work. If you sharpen the blade a few times you will get to the point where that ricasso will prevent the blade edge at the heel from sitting flat on a cutting board and you will not be able to chop with this section.
The taper on the forward section of the handle looks spot on. You may consider moving that front bottom pin up a bit so you can round out the transition from handle to the back of the blade. Apparently a common grip that chefs sometimes use for fine work is a "pinch grip". This is where you to choke up on and pinch the blade ahead of the handle between index finger and thumb. Then the side of one of the other fingers will rests in that transition area to provide control.
Good luck,
-bill
|
Thanks for taking the time for your feedback. I see what you mean about the ricasso. Definitely will do that on the next.
|
Tags
|
154cm, amateur, back, blade, brass, edge, finish, grinding, hand, handle, handles, hobby, kitchen, kitchen knife, knife, knives, make, making, scales, steel, walnut, what steel, wood ![](images/misc/11x11progress.gif) |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -5. The time now is 02:54 AM.
|