The Folding Knife (& Switchblade) Forum The materials, techniques and the designing of folding knives. |
![Old](images/statusicon/post_old.gif)
05-30-2015, 01:00 AM
|
Skilled
|
|
Join Date: Jun 2002
Posts: 303
|
|
liner lock unlocking issue?
Got two liner locks I built awhile ago, and both locked up bank vault tight when finished and for a while after. Now both will unlock with just a bit of pressure on the spine. Lock bevel is ground to 7 1/2 deg, liners are ti, blade steel is CPM 154.
I'm thinking of going to a "failsafe" lock cut, and maybe adding an additional safety like on the Gerber Fairbain folding dagger.
Any idea why the lock is suddenly releasing and any idea of where to get .020 stainless sheet?
Thanks
|
![Old](images/statusicon/post_old.gif)
06-01-2015, 07:13 AM
|
|
|
Join Date: Jun 2009
Posts: 1
|
|
Hi Will
got no answers for you But do have the same issue with 2 I have done ,mine have SS liners I would be keen to see what a Failsafe lock cut looks like or the safety like on a auto ( don?t get auto?s down here in AUS something about them being dangerous bla bla bla ) I think that the tang of the blade has rounded the lock on mine as the lock wasn't HT I will take it a part soon and have a good look at it .
I will be interested at the out come of any results you find .
Lee
|
![Old](images/statusicon/post_old.gif)
06-01-2015, 11:17 AM
|
Skilled
|
|
Join Date: Jun 2002
Posts: 303
|
|
The fail safe is basically a hollow grind on the lock face where the leading edge is just a bit higher, then shallow and then ramps up, if I'm explaining it correctly. Also thinking of adding a thin metal safety likes on the Gerber Fairbain dagger.
|
![Old](images/statusicon/post_old.gif)
08-01-2015, 01:17 AM
|
Master
|
|
Join Date: Aug 2002
Location: Burleson, Texas
Posts: 851
|
|
Sounds like either the Ti lock has lost its bend or the stop pin has either eaten into the blade tang area or warn/moved from its original hole position. I would say that it is the lock itself. What it the thickness of the liners and the thickness of the blade.
Curtis
__________________
Curtis Wilson
Wilson's Custom Knives, Engraving, and Scrimshaw
|
![Old](images/statusicon/post_old.gif)
08-01-2015, 08:42 AM
|
![Don Robinson's Avatar](image.php?s=929aa366b7f46d7fb5dd834cf06d75ae&u=1413&dateline=1427156520) |
Hall of Famer
|
|
Join Date: Jan 2003
Location: Brownsville, Texas
Posts: 4,873
|
|
Curtis, where in the world have you been?
|
![Old](images/statusicon/post_old.gif)
05-07-2016, 09:11 PM
|
Registered
|
|
Join Date: Feb 2016
Location: Shanghai
Posts: 3
|
|
I've been making frame locks for a few months. I think there are 2 possibilities, one is the edge of the tang maybe grounded too much. It's needed to be ground to give the detent ball a smooth riding, but too much will weaken the lock. The second I think maybe the tension of the lock is too weak.
|
![Old](images/statusicon/post_old.gif)
05-07-2016, 11:05 PM
|
Skilled
|
|
Join Date: Jun 2002
Posts: 303
|
|
I shortened the lock bar length just a bit, seems to be working so far. I won't know until for sure until I carry one on a rig again for a while.
|
![Old](images/statusicon/post_old.gif)
05-18-2016, 03:42 AM
|
Registered
|
|
Join Date: May 2016
Posts: 1
|
|
I had too faced this issue. It was a buck knife. I don't remember but I think I found it on a folding knife. However, they replaced the piece.
|
Tags
|
auto, ball, bee, bevel, blade, buck, dagger, detent, edge, folding, folding dagger, folding knife, grind, hollow grind, knife, liner lock, lock, making, metal, stainless, steel, tang, thickness ![](images/misc/11x11progress.gif) |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -5. The time now is 03:25 AM.
|