|
|
Knife Making Courses & Class Schedule Look here for information about course topics and class schedules. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Making a single blade slipjoint folder
Don Robinson will lead you through all the steps from start to finish making a single blade slipjoint pocket knife using traditional pin construction.
A complete CAD design for the knife will be furnished to you after you sign up for the course. Minimum required equipment: Drill press, belt sander, propane or acetylene torch, 4% silver solder and flux, and miscellaneous hand tools. Suggested helpful equipment: Small milling machine, Knifemaker's belt grinder. Materials needed: 3/32" blade and back spring material, .030 to .040 brass or stainless steel sheet, bolster material, 1/16" and 3/32"" dia. pin material to match bolsters, a 3/32" reamer, a #44 drill, a center drill. Duration of class is 45 days. Cost: $49.95 includes CAD design. Last edited by Don Robinson; 06-30-2006 at 07:47 AM. Reason: Edited to change to traditional pin construction |
#2
|
||||
|
||||
The design
Here's what we'll build together.
Last edited by Don Robinson; 02-01-2007 at 01:28 PM. |
#3
|
||||
|
||||
Here's what we'll build
This is one page of the slipjoint design for the knife we'll build together.
|
Tags |
blade, folding knife, knife |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|