|
|
Register | All Photos | FAQ | Members List | Calendar | ShopStream (Radio/TV) | Search | Today's Posts | Mark Forums Read |
The Newbies Arena Are you new to knife making? Here is all the help you will need. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
neoprene handles?
Does anyone have suggestions for bonding neoprene slabs to cruwear kitchen knives i am working on? I plan to use 1/8" micarta for the pins, but not sure about bonding agent. I have Devcon 2-ton, JB weld, and Gorilla glue.
Appriciate any suggestions THANKS |
#2
|
||||
|
||||
I use 60 grit paper to rough the metal, clean with acetone, and then glue with K&G Finishing's epoxy. I've never used Gorilla glue but have heard it's very good. The other two you mentioned are good products but not really what you need with neoprene.......
|
#3
|
|||
|
|||
Thank you Ray
|
Tags |
knives |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|