|
|
Register | All Photos | FAQ | Members List | Calendar | ShopStream (Radio/TV) | Search | Today's Posts | Mark Forums Read |
The Newbies Arena Are you new to knife making? Here is all the help you will need. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Allen Blade videos
Hello, does anyone have or recommend the Allen Blade videos. Looking at 3, first is heat treating, then hollow grinding and flat grinding. have seen and heard of alot of other videos but came across these and thought I would see if they were worth getting for the new knifemaker. Thanks Jeff
|
#2
|
||||
|
||||
I have the hollow grinding video and found it very useful when I was learning to hollow grind. Mine cost $10 way back when I bought it. The price may be higher now but if it's anywhere in that range it should be one of the better buys on the subject.......
|
#3
|
|||
|
|||
Had the flat grind and hollow grind.
Really helped me get the right movement at the grinder. Worth the money TJ __________________ TJ Smith Knifemaker |
#4
|
||||
|
||||
Where can you get these video's? URL?
Thx, Bernez __________________ Be patient: in time, even an egg will walk. |
#5
|
||||
|
||||
Allan says:
The videos i have are as follows,,,,, Hollow Grinding, FLat grinding, Carbon steel heat treating, Kydex sheath making, SLab Handle construction, and Disk/hand satin finishing. people can email me at bladecutlery@comcast.net if they are interested. I charge $13.00 per video plus the shipping of $3.00 . |
Tags |
blade, knife |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|