MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > The Display Case

The Display Case A place to post your latest knives and creations. Let the Knife Network community see your work first!

Reply
 
Thread Tools Display Modes
  #1  
Old 12-03-2001, 08:59 AM
JHossom
Guest
 
Posts: n/a
Battle Gear


From the beginning, starting on 9/11, my Retribution line of Combat Knives was designed to go to war. Three of the four have been designed since then and the largest was not completed until after 9/11. Aimed at equipping troops, this group of knives was also therapy for some of the anger and frustration I've felt since that terrible day.

From Top to Bottom:

Retribution: Evolving from my Hunter-Killer, but without the bolstered guard, this blade is 7", meeting carry length restrictions of some units. The extended swedge, with or without the serration's was ground with a 2" contact wheel and is fully sharpened. The small contact wheel allows the narrow edge to be fully developed within a very narrow space. The primary edge was ground with a 5" wheel, to allow removal of as much weight as possible, while maintaining a thick central spine all the way to the point. Handle is Black Linen Macarta with mosaic pins and thong hole. The knife is 12-3/4" OAL, and weighs 12 oz.

Massive Retribution: 12" blade, 18-1/2" OAL, and weighs 15 oz. Again the full length swedge, serration's optional, was ground with a 2" wheel and is fully sharpened. The primary edge was ground with an 8" wheel, also removing a lot of weight, while maintaining a heavy spine for strength. Same handle as Retribution.

Revenge: Tanto-edged version of Retribution, also with a 7" blade and same handle. Same specs.

Reprisal: 3-1/4" combat utility knife to accompany the above. This knife is designed to ride in any convenient location, especially a boot carry, and weighs just 3 oz. All edges are sharp, giving it a multi-role capability.



Now, we are ready...
Reply With Quote
  #2  
Old 12-03-2001, 12:18 PM
JerryO13
Guest
 
Posts: n/a

Me Likes! Hey Jerry are those full tang knives? if so I would like to see some metal sticking out past the birds beak pommel.
Reply With Quote
  #3  
Old 12-03-2001, 01:37 PM
JHossom
Guest
 
Posts: n/a

Jerry, they are full tang knives, and certainly it would be possible to enhance the skull crusher. What is already there is something you wouldn't like cracking your noggin though. To make an extended skull crusher, and maintain the present balance would be difficult but doable I think. I'd just need to drill a WHOLE LOT of holes.

I should have mentioned that these were all done with 3/16" 154CM. Magic by Bos...
Reply With Quote
  #4  
Old 12-03-2001, 03:30 PM
TheHarleyman
Guest
 
Posts: n/a

Wickedly Fearsome!
I had some inner city folks comment on the machette that I use to chop ice away from ATM Kiosk doors. They fear that more than my sidearm that I carry. These buggers should be normal Militay issue to our forces, that will make the bad guys tremble. IMHO, D
Reply With Quote
  #5  
Old 12-03-2001, 04:44 PM
Coop747
Guest
 
Posts: n/a

Jerry,

Those are the slickest, meanest, BADDEST, offensive knives I have ever seen. I did say offensive. No one would even try starting up a fight with THOSE blades!

Seriously, I think you have mastered some of the best lines, curves and angles in this set of knives. Nice work! (I've said it before and I'll say it again--that TANTO is awesome!!)

Coop
Reply With Quote
  #6  
Old 12-03-2001, 11:23 PM
NickWheeler
Guest
 
Posts: n/a

Beautiful and Wicked Jerry!!!! Wow!

Nick
Reply With Quote
  #7  
Old 12-04-2001, 12:47 AM
Mondt
Guest
 
Posts: n/a

Awesome work Jerry! Would not want to look upon the receiving end of any one of those!
Reply With Quote
  #8  
Old 12-04-2001, 02:07 PM
JerryO13
Guest
 
Posts: n/a

Jerry, meant to ask before. What do they cost?
Reply With Quote
  #9  
Old 12-04-2001, 03:02 PM
JHossom
Guest
 
Posts: n/a

Thanks guys. I sincerely appreciate the positive feedback.

The price is a little up in the air at the moment. Subject to change...

In 154CM:

Retribution - $300
Massive Retribution - $450
Revenge - $325
Reprisal - $250

Price includes Concealex sheath wth Tek Lock attachment. Standard handle is Linen or Canvas Micarta, others are optional. Serration's are also optional on all models - $35.

CPM-3V or S30V will add $100 (Reprisal, add $50).
Reply With Quote
  #10  
Old 12-16-2001, 07:51 PM
JHossom
Guest
 
Posts: n/a

One more. This one is called Requiem. 7" single edged blade with what I call my Yuppie Camo.


Reply With Quote
  #11  
Old 12-22-2001, 05:05 PM
ShaneBru
Guest
 
Posts: n/a
Re: Requiem


The Requiem is very cool!
Shane B
Reply With Quote
Reply

Tags
blade, knife, knives


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

(View-All Members who have read this thread : 0
There are no names to display.
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 03:47 PM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved