MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Knife Making Discussions > Fine Embellishment

Fine Embellishment Everything from hand engraving and scrimshaw to filework and carving. The fine art end of the knifemaker's craft.

Reply
 
Thread Tools Display Modes
  #1  
Old 06-07-2018, 11:30 AM
Rasmus Kristens Rasmus Kristens is offline
Enthusiast
 
Join Date: Jul 2014
Location: Denmark
Posts: 88
Wire inlay in soapstone?

Hi. Is it possible to make wire inlay in soapstone?
How should it ve done if its Even possible.

I couldnt find Any results on Google.

Last edited by Rasmus Kristens; 06-07-2018 at 11:50 AM.
Reply With Quote
  #2  
Old 06-07-2018, 06:55 PM
damon damon is offline
Skilled
 
Join Date: Jul 2013
Location: NE Tennessee
Posts: 392
yes, but its not easy. you need to be careful not to chip out the top edges of the inlay channel. burnish the wire into place rather than hammering. if you need to hammer a spot, take your time and tone try to move too much too fast.
id use fine silver, or gold. when cutting the lines (ive done this with mother of pearl) cut a slight under cut angle. no need to get too acute it doesnt take much to hold it in place.

practice on a few scraps with some copper. if you can do that, then gold will be even easier.

Last edited by damon; 06-07-2018 at 06:57 PM.
Reply With Quote
  #3  
Old 06-08-2018, 02:00 AM
Rasmus Kristens Rasmus Kristens is offline
Enthusiast
 
Join Date: Jul 2014
Location: Denmark
Posts: 88
Thanks damon.
So you wont use any adhesived its only fastened mechanical?
I can't imagine the wire sticking if you can't get a prober undercut angle? Do you ahve a trick for achiving this, or is it "only" practice?

I have never done wire inlay in anything yet, so i think i will start in wood, and mayby try stone later.
Reply With Quote
Reply

Tags
angle, art, ca, cutting, easy, inlay, make, mother of pearl, pearl, silver, stone, wood


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Wire inlay book Reenactor Fine Embellishment 0 05-14-2017 08:58 PM
Wire Inlay (Help!!) DND Fit & Finish 4 02-23-2005 08:27 PM
Wire Inlay (Help!) DND Fine Embellishment 1 02-23-2005 05:22 PM
Which methods of wire inlay ?? BrianT Fine Embellishment 8 01-22-2003 08:37 PM
Wire Inlay Don Cowles Fine Embellishment 4 07-14-2002 11:44 AM


All times are GMT -5. The time now is 04:14 AM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved