MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Tool Time

Tool Time Let's talk shop. Equipment, Tips & Tricks, Safety issues - Post it here.

Reply
 
Thread Tools Display Modes
  #1  
Old 06-04-2018, 10:54 AM
otsblades otsblades is offline
 
Join Date: Mar 2018
Posts: 1
Knife/Blade Sharpening

What does everyone use to sharpen them knives/blades?
Reply With Quote
  #2  
Old 06-08-2018, 06:48 AM
jimmontg jimmontg is offline
Guru
 
Join Date: Jan 2016
Location: Now live in Las Cruces NM.
Posts: 1,096
I use diamond stones or hones, whichever term is correct.

Mainly because on very hard and wear resistant blade steels they will sharpen faster. I sharpen by hand and some steels can take all day. I may finish with a fine Arkansas stone to just hone the edge a bit. l usually just leave my knives just how they come off my 800 grit EZE Lap diamond stone that is 20 years old so it's a little smoother now. l find that is sharp enough for just about anything l want it to do except for cutting leather or wood carving. For those activities l take the edge down to 2000 grit using a very fine Crystolon oil stone and after that l strop my leather tools on 5000 grit diamond compound on thin leather glued to a stick and buff the edge finally with 10,000 grit diamond. A super sharp and smooth edge makes cutting leather a lot easier.
Reply With Quote
  #3  
Old 06-15-2018, 04:18 AM
M&J's Avatar
M&J M&J is offline
Skilled
 
Join Date: Dec 2004
Location: So. Cal
Posts: 301
I sharpen on the 2x72" grinder with a fixture taken from the Lansky type system. Have made variations over the years to adapt and this allows a consistent angle every time. This is one of the early pics. Table is set for a specific degree based on my usual thickness of blades and this works well for my pieces. Will use a well worn 320 or 400 grit. Based on wear I would estimate that the belts are in the 1400-2000+ grit range. If starting a new edge I'll use a fresh 320 then polish the edge with the worn belts followed by a quick pass on the leather with compound.
Attached Images
File Type: jpg sharp3.jpg (38.0 KB, 21 views)


__________________
Mike
Reply With Quote
  #4  
Old 08-07-2018, 04:57 PM
oxo oxo is offline
 
Join Date: Aug 2018
Posts: 1
I made myself a jig based on the Lansky System, also made a few jigs to sharpen different smaller knifes, including a one for the Opinel Blades.

Cheap diamond files & waters stones off Aliexpress, modified square handles it makes a decent job.

Reply With Quote
Reply

Tags
2x72, angle, blade, blades, carving, cutting, diamond, diamond stone, edge, files, finish, grinder, hand, hone, knife, knives, leather, made, sharpening, stone, strop, thickness, tools, wood


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
large knife sharpening dtec1 The Newbies Arena 8 10-10-2017 01:31 PM
Blade Sharpening Help TWITHERS The S.R. "Steve" Johnson Forum 3 06-17-2015 01:57 PM
Blade thickness before sharpening... Chris Daigle High-Performance Blades 17 11-24-2002 03:27 PM
Using a sharpening steel to touch up blade??? Comet Knife Making Discussions 2 09-25-2002 09:56 AM
Knife sharpening DiamondG Knives The Outpost 7 08-26-2002 02:55 PM


All times are GMT -5. The time now is 08:15 AM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved