|
|
Register | All Photos | FAQ | Members List | Calendar | ShopStream (Radio/TV) | Search | Today's Posts | Mark Forums Read |
The Newbies Arena Are you new to knife making? Here is all the help you will need. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
forge burner
Hi I would like to know if someone here have made a forge burner from
the plans we all see online...there are some cool stuff out there but every time I try to find the parts I get stuck. So my question today is : do you know a web site the SELL the (01) burner kit or already complete ? ( propane forge ) Or anybody here could build one for me and sell ??? Please let me know. THANKS |
#2
|
||||
|
||||
hey M.TEX I found this website a big help. All the parts are available in most plumbing shops or places that sell pipe. There several options in forge types and setups. Hope it helps.
http://www.zoellerforge.com/sidearm.html |
#3
|
||||
|
||||
X2 on zoeller forge . Thats where i got all my stuff to build 2 forges . SCOTT
__________________ Scott Davidson |
#4
|
|||
|
|||
http://www.elliscustomknifeworks.com/ is probably the best one to deal with. He has kits for either venturi or blower type burners and you can get the kits in parts are already put together. He also sells refractory and lining material for forges. He is a really great guy to deal with. Good luck.
|
#5
|
||||
|
||||
Ellis' website has everything you need if you want to buy the kit or the finished burner. If you want to build it yourself then have a look at my site. If you can't find the parts you need to build a burner the you're trying to build it too complicated!
I know this whole subject seems overwhelming at first, it did to me, so I've been experimenting to find out just how simple I can make it. So far, I've gotten good results with very, very simple builds. For instance, my Dirt Simple venturi burner consists of two parts available from any plumbing supplier. The forced air burners perform much better though and I'm currently working on simplifying that whole system. Anyway, have a look and maybe pick up some ideas: http://rayrogers.com/forge2.htm |
#6
|
||||
|
||||
Thanks guys !
I will look all this Info and see what one fit better for my level.... I will let you know later what I will be doing... Many thanks to all ! Last edited by M.TEX; 08-06-2009 at 09:46 AM. |
#7
|
||||
|
||||
Someone here was working on a NEW burner and I lost his Name and Email.
It was a very simple Burner ! So Here is the thread again...IF you are out there PM or send me ANOTHER EMAIL I did like the way the burner was build , but now I can't find.... Thanks ( I hope I can find this person ) M.TEX |
Tags |
forge |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|