MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Knife Making Discussions > The Newbies Arena

The Newbies Arena Are you new to knife making? Here is all the help you will need.

Reply
 
Thread Tools Display Modes
  #1  
Old 02-20-2021, 02:45 AM
jimmontg jimmontg is offline
Guru
 
Join Date: Jan 2016
Location: Now live in Las Cruces NM.
Posts: 1,296
Thumbs up A New Powdered Steel; AR RPM9

It is made in China as it's a budget steel in the new CJRB Ria folder knife at around $55-$65 range. On the Cedric & Ada Gear and Outdoor video channel on YouTube he made 250 cuts on 10mm thick sisal rope after putting a razor's edge on it. The folder he had the lock had a very weak lock up and he fixed it up, but he didn't trust it saying to be careful as the knife is thin without a lot of material to lock up against.

Now the composition of AR-RPM9 is, 0.9% Carbon, 18% Chromium, 1.0% Molybdenum, 0.45% Manganese, 0.1% Vanadium, 0.30% Cobalt, 0.2-0.8% Silicon, less than 0.40% Nickle. So although I'm not a metallurgist it held an edge almost as good as D2 with a good heat treat. I will guess the 1% Molybdenum gave out some Moly Carbides with the Chromium and Cobalt added in. Since it's a particle blown grain will be fine and the Vanadium might add a little grain restriction too. Anyone with more knowledge of metallurgy is welcome to add your two cents worth as two cents worth is about all I know. I'd be interested to know what the 0.30% cobalt does.
Reply With Quote
Reply

Tags
a, blade, carbon, edge, fixed, folder, heat, heat treat, knife, lock, made, material, metallurgy, outdoor, razor, steel, thin, video, worth, youtube


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
How about powdered D2? DaveL Heat Treating and Metallurgy 1 10-28-2007 09:51 PM
Questions on powdered steel Dan Graves The Damascus Forum 25 01-19-2006 01:24 PM
Powdered Steel Jerry V The Supply Center 2 09-26-2002 08:33 AM
Online source for powdered steel anyone? JossDelage Ed Caffrey's Workshop 2 02-12-2002 12:47 PM
Re: Powdered Steel MDHoffmann Ed Caffrey's Workshop 0 02-01-2001 08:49 PM


All times are GMT -5. The time now is 01:10 AM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved