|
|
Register | All Photos | FAQ | Members List | Calendar | ShopStream (Radio/TV) | Search | Today's Posts | Mark Forums Read |
The Newbies Arena Are you new to knife making? Here is all the help you will need. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
New Knifemaking FAQ available
I decided to write down a bunch of the questions I get asked on a regular basis and provide MY version of the answers. I have added a few pictures to help my explainations that I got from a few of the CKD member web pages. I give the name of the person I got the picture from as well as a link to their web page. Please let me know if anyone wants their picture or name removed and I will remove it immediately.
If anyone has any suggestions for more questions to be added (and answered) just let me know and I can ad them. I may try to improve the look of the page when I do a rewrite of my web page which will hopefully happen before too long. This was a lot of typing and many hours at the keyboard so if anyone sees mistakes, please let me know. New Knifemaker Frequently Asked Questions http://www.warnerknives.com/knifemaker_faq.htm Hope this helps somone. Last edited by Bob Warner; 02-14-2003 at 07:28 AM. |
#2
|
|||
|
|||
Hey Bob, that is a very nice FAQ. Thank you for devoting the time to write it. One part of it is a little confusing though. When you talk about "What is a pin vise?" did you mean to say "Pin Press"? When I think of a pin vise, I think of a little handle to hold small files and small drill bits. Other than that, Great Job!:cool:
|
#3
|
||||
|
||||
Pin Press is correct. Told you I was at it for a while. It has been fixed.
|
#4
|
||||
|
||||
Wow ! thanks !
Wow ! Verry good job and good idea !
A lots of goog information !! Thanks ! Alain M-D |
#5
|
||||
|
||||
Faq's
Hi Bob
I want to say thanks for that clear and concise Faq page. I /we really appreciate all the time and effort you put forth to bring this together. Excellant job! Thanks Again Vince |
#6
|
||||
|
||||
Bob, good work on the FAQ. Nice contribution to the community.
|
#7
|
|||
|
|||
Great Bob, lots of good sound info.
|
#8
|
|||
|
|||
Fantastic! Thanks Bob, a quick and informative reference. Can we get a BIG FAQ button for it?
__________________ PaulD Founding member and secretary of; New England Custom Knife Association (NECKA) Check out our new website! |
#9
|
||||
|
||||
Great stuff Bob, thanks for putting all the work into this, I sent you something in the mail
|
#10
|
|||
|
|||
Very Nice ! Thanks
__________________ Support your local Firefighters! GO NAVY BEAT ARMY! |
#11
|
|||
|
|||
FAQ
Bob, great job!! Thanks for taking the time to put that together, it is greatly appreciated!
Bill. |
#12
|
||||
|
||||
No problem.
|
#13
|
||||
|
||||
Bob
Truely wonderful!!!!!!! Thank you for the time and effort that you put into helping us with questions. Not only with the FAQ's but with every reply that you give to any other question. You are a valuable asset to those seeking help here. I think you should have posted your pic of your Damascus railroad spike on your FAQ though. Just add that if you want to guarentee the quality of the spike, you will have to make your own. For those questioning what I am talking about, Bob posted a pic some time ago of a Damascus spike knife that he forged himself. Thanks again Bob Brian |
#14
|
||||
|
||||
I may do that. I am re-writing my web site right now and may add the picture to the FAQ.
If anyone is interested, here is the not so great picture. |
#15
|
|||
|
|||
Mr. Warner,
Fantastic information! Thank you for the patience & time for explaining so much - greatly appreciated! __________________ A dog will not bite the hand that feeds him, unless it is raised in anger! |
Tags |
blade, forge, knife, knives |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|