MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Knife Making Discussions > The Newbies Arena

The Newbies Arena Are you new to knife making? Here is all the help you will need.

Reply
 
Thread Tools Display Modes
  #1  
Old 02-04-2016, 07:41 PM
Kevin87 Kevin87 is offline
Registered
 
Join Date: Feb 2016
Posts: 2
Knife scale specs

Hello everyone,
I am new here, and have never made a knife before, but have turned a LOT of pens, and made a LOT of blanks, specifically for turning projects. I have a vacuum stabilizing set up and a pressure pot for casting, and have done some really interesting things with all kinds of materials. Although I haven't ventured into the knife making world (which I plan to do and am excited to learn), I would like to start casting some materials for knife making, and wanted to get some opinions from knife makers before I start. At this point I'm more interested in making the materials for the knife, than the knife itself.

1. After casting the appropriate size block, I cut it on the bandsaw into a bookmatched set approx. 3/8" thick by 5" each. Now, If I were to give, or sell these for the purpose of knife making, can they be rough cut? or should they be sanded on all sides? Can they be sealed or left natural?

2. For a lot of my pen blank casting, I do not stabilize pieces of burl, unless i feel it significantly reduces the chance of blowing it up on the lathe. For knife makers, do you always prefer all burl or punky woods to be stabilized?

I hope this is the right place for this post, and I would greatly appreciate any feedback!!

Thanks!!!
Reply With Quote
  #2  
Old 02-04-2016, 07:53 PM
jmccustomknives jmccustomknives is offline
Skilled
 
Join Date: Mar 2012
Location: Alabama
Posts: 554
Ask a 100 knifemakers and you'll probably get 98 different answers. Personally, I prefer buying blocks 1 1/2x 2 x 5 or so. For slabs I prefer them to be thicker than 1/4". I will not use punky woods in any fashion, these are a problem from the start.

Personally, I hate dyed woods and would rather have natural colors but that's my taste.

Do you also do resin filling?
Reply With Quote
  #3  
Old 02-04-2016, 07:57 PM
Kevin87 Kevin87 is offline
Registered
 
Join Date: Feb 2016
Posts: 2
Thanks for the response, and yes, the majority of my casting is done with Alumilite resin and worthless burl wood and other things
Reply With Quote
  #4  
Old 02-04-2016, 08:00 PM
Ray Rogers's Avatar
Ray Rogers Ray Rogers is offline
Founding Member / Moderator
 
Join Date: Jun 2002
Location: Wauconda, WA
Posts: 9,788
Soft, burl, or punky woods need to be stabilized. If you want to sell wood you need to sand down at least one side and polish it a little so the buyer can see what it will look like when they finish it....


__________________

Your question may already have been answered - try the Search button first!






Reply With Quote
Reply

Tags
art, blanks, block, burl, casting, knife, knife making, made, makers, making, materials, polish, post, problem, resin, sand, scale, sell, stabilizing, wood, woods


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
knife scale questions ferris The Newbies Arena 8 10-19-2013 06:06 AM
knife scale question SKEELSarms The Newbies Arena 4 05-31-2012 11:22 PM
specs. on a ka bar knife Robert Washburn Knife Making Discussions 6 10-16-2008 10:07 AM
Cutting competition knife specs????? B. Buxton Knife Making Discussions 8 09-26-2004 04:10 PM
Anvil specs TMK1000 Tool Time 17 10-19-2001 08:06 AM


All times are GMT -5. The time now is 06:49 PM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved