MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Knife Making Discussions > The Newbies Arena

The Newbies Arena Are you new to knife making? Here is all the help you will need.

Reply
 
Thread Tools Display Modes
  #1  
Old 02-04-2017, 04:44 PM
dtec1 dtec1 is offline
Guru
 
Join Date: Aug 2015
Location: ny
Posts: 1,438
anodizing..

hey guys so I am trying to come up with a rig to anodize titanium. the adjustable power source I use to etch my logo's doesn't have enough volts. I saw a video where a guy hooked up a bunch of 9v batteries I tried it with not much luck at all....I really don't want to spend crazy cash on a anodizer... does any one have any ideas of something I could rig up either from something I may be able to salvage or even if there is something I can buy that I could rig to work that's not crazy expensive...any idea's?
Reply With Quote
  #2  
Old 02-04-2017, 06:01 PM
Ray Rogers's Avatar
Ray Rogers Ray Rogers is offline
Founding Member / Moderator
 
Join Date: Jun 2002
Location: Wauconda, WA
Posts: 9,840
It doesn't take a lot of volts and very little amperage so be careful screwing around with that stuff.

I did it once with nothing but two 6v lantern batteries (the square batteries with spring terminals that you see in big flashlights that have handles on them). Use one battery for whatever color that gave me and two batteries for another color. Then, I went and spent $500 on a professional titanium anodizer. Got a few more colors. In the end, I gave the anodizer away. There is no practical use for anodizing titanium that I could see unless you're making very VERY high dollar knives that will spend their lives in a glass case. Anodizing on titanium has a lifetime measured in hours if you handle it....


__________________

Your question may already have been answered - try the Search button first!






Reply With Quote
  #3  
Old 02-04-2017, 07:53 PM
jimmontg jimmontg is offline
Guru
 
Join Date: Jan 2016
Location: Now live in Las Cruces NM.
Posts: 1,345
I didn't know that Ray. Aluminum holds anodize pretty well.
Reply With Quote
  #4  
Old 02-04-2017, 09:29 PM
Ray Rogers's Avatar
Ray Rogers Ray Rogers is offline
Founding Member / Moderator
 
Join Date: Jun 2002
Location: Wauconda, WA
Posts: 9,840
Ya, but aluminum anodizing is an entirely different process, produces a thicker and harder coating. Anodizing on titanium is more like etching a blade with vinegar only that would be heavier and more durable than what you get on titanium ...


__________________

Your question may already have been answered - try the Search button first!






Reply With Quote
  #5  
Old 02-04-2017, 09:34 PM
jimmontg jimmontg is offline
Guru
 
Join Date: Jan 2016
Location: Now live in Las Cruces NM.
Posts: 1,345
Only Titanium anodize I ever saw in aerospace was grey.
Reply With Quote
  #6  
Old 02-05-2017, 08:38 AM
Ray Rogers's Avatar
Ray Rogers Ray Rogers is offline
Founding Member / Moderator
 
Join Date: Jun 2002
Location: Wauconda, WA
Posts: 9,840
I wonder why they would bother since titanium is naturally grey ...


__________________

Your question may already have been answered - try the Search button first!






Reply With Quote
  #7  
Old 02-05-2017, 11:41 AM
dtec1 dtec1 is offline
Guru
 
Join Date: Aug 2015
Location: ny
Posts: 1,438
yeh I know its not a very durable coating that's for sure, I do have a bunch of those batteries you were talking about worth a shot.....is heat coloring any more durable or no?
Reply With Quote
  #8  
Old 02-05-2017, 01:35 PM
jimmontg jimmontg is offline
Guru
 
Join Date: Jan 2016
Location: Now live in Las Cruces NM.
Posts: 1,345
I think the anodize was prep for another process, they were not large parts. I remember some parts being platinum plated, but it was for satellite parts. I still have some nickel silver platinum sheet metal pieces for making little springs.
Reply With Quote
  #9  
Old 02-05-2017, 02:25 PM
Ray Rogers's Avatar
Ray Rogers Ray Rogers is offline
Founding Member / Moderator
 
Join Date: Jun 2002
Location: Wauconda, WA
Posts: 9,840
No, heat coloring is also an oxidation process. It may be a heavier oxidation but not enough to make a huge difference. Of course, if the knife goes in a glass case then it doesn't make much difference.

If you want to know how durable heat coloring is just take a small piece of steel, polish it, and then heat color it. Carry it around in your pocket for a week or two and you should have your answer ...


__________________

Your question may already have been answered - try the Search button first!






Reply With Quote
  #10  
Old 02-06-2017, 06:43 PM
WNC Goater WNC Goater is offline
Skilled
 
Join Date: Dec 2015
Location: NC Mountains
Posts: 470
Quote:
Originally Posted by jimmontg View Post
I think the anodize was prep for another process, they were not large parts. I remember some parts being platinum plated, but it was for satellite parts. I still have some nickel silver platinum sheet metal pieces for making little springs.
Nickel silver platinum?


__________________
Find me on Facebook:
https://www.facebook.com/gpopecustomknives/

Gloria In Excelsis Deo!!
Reply With Quote
  #11  
Old 02-07-2017, 01:45 AM
jimmontg jimmontg is offline
Guru
 
Join Date: Jan 2016
Location: Now live in Las Cruces NM.
Posts: 1,345
Yes

A .025 sheet metal material that came in a box about 1" wide by 18" long. Very tough stuff. Wasn't supposed to keep any spares, but the tolerances were +0.000 vs. -0.003 so it literally took me almost 4 days to make 24 little springs. I just happen to have some spares leftover. Very tough stuff.
Reply With Quote
  #12  
Old 02-07-2017, 09:04 AM
dtec1 dtec1 is offline
Guru
 
Join Date: Aug 2015
Location: ny
Posts: 1,438
yeh I guess your right depends what kinda knife you making and all the anodizing is usually on a very high end knife. I have seen liners anodized on some cheaper knives but all the really nice stuff like texture tech stuff and timascus is deffinitly high end knives....but man the timascus stuff is just absolutely beautiful
Reply With Quote
  #13  
Old 02-07-2017, 07:42 PM
WNC Goater WNC Goater is offline
Skilled
 
Join Date: Dec 2015
Location: NC Mountains
Posts: 470
Quote:
Originally Posted by jimmontg View Post
A .025 sheet metal material that came in a box about 1" wide by 18" long. Very tough stuff. Wasn't supposed to keep any spares, but the tolerances were +0.000 vs. -0.003 so it literally took me almost 4 days to make 24 little springs. I just happen to have some spares leftover. Very tough stuff.
Are you saying it was an alloy made of nickel and platinum?


__________________
Find me on Facebook:
https://www.facebook.com/gpopecustomknives/

Gloria In Excelsis Deo!!
Reply With Quote
  #14  
Old 02-07-2017, 08:29 PM
jimmontg jimmontg is offline
Guru
 
Join Date: Jan 2016
Location: Now live in Las Cruces NM.
Posts: 1,345
Nickel, silver and platinum alloy. Platinum is a very tough metal, these springs were for I do not know what purpose, but I made 24 springs every April so I'm guessing spare parts I think for the SR 71 as I made parts for it every April and May (1980s). After I formed the springs I put four holes in each part and they went to heat treat. There were 6 bends and 2 hems with ridiculous tolerances for sheet metal. They were an inch wide and about one and a half inch long when finished.
Reply With Quote
  #15  
Old 02-07-2017, 08:41 PM
damon damon is offline
Skilled
 
Join Date: Jul 2013
Location: NE Tennessee
Posts: 409
that sounds odd... none of those metals are known for their "spring" properties.
corrosion resistance, brittleness/hardness, and whiteness of color....
Reply With Quote
Reply

Tags
anodizing, battery, blade, buy, case, etch, etching, flashlights, glass case, handles, heat, heat treat, knife, knives, made, make, making, material, metal, pocket, polish, silver, steel, titanium, video


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
anodizing Gooch The Folding Knife (& Switchblade) Forum 8 06-23-2003 10:52 AM
anodizing Ti SkaerE Tool Time 9 04-07-2003 05:57 PM
Anodizing K_Conrad The Folding Knife (& Switchblade) Forum 26 01-20-2003 06:18 PM
Anodizing Ti. Jerry Adams Tool Time 1 11-24-2002 08:11 PM
Anodizing scott475 The Newbies Arena 10 05-02-2002 12:30 AM


All times are GMT -5. The time now is 03:00 PM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved