|
|
General ::: Items and Bargains Good deals on useful items for sale by Knife Network members |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Round glass dry vac stabilizing chambers
here is a chamber that i made for a good customer of mine that wanted to dry wood under vacume in DNA, the chamber he has he can not put DNA in it, so this is the type i use personaly for stabilizing my woods, its4.5" in dia and 18" long, this is a dry vac system.
|
#2
|
|||
|
|||
A price would be nice. ???
__________________ Wolf-Mountain Knives http://www.wolf-mountain.com |
#3
|
|||
|
|||
stabilizing chambers
Ok guys heres what i have! i have two small chambers 2"3/4 ID x 15 1/2" long
and two large chambers 3 1/2" dia x 19" long both large and small chambers are all wet vac chambers, chambers include bleeder valve,vacuum gauge, and chamber stand, all chambers come apart for easy cleaning and have been tested to 29.5" of vacuum, 65.00 each for the small ones and 80.00 ea for the large ones, two of these already are sold to guys on this page, so if you want one let me know! i will have more avilable next weekend |
#4
|
||||
|
||||
I would like to see a Short, fat one around 8 inches round X 10 in tall . where do you get the Plexiglass tubes to make them? I am in Tennessee.
Sam __________________ R. Yates 13 & On Forge Live and Let Live , Do Not trespass on Life or Me! As we are not so kind or forgiving ! |
#5
|
|||
|
|||
how about 6"dia? also Plexiglass tubes i will not use, theses are thick glass chambers, due to issues with plexiglass hazzing when placing resin directly in to plexiglass chambers.
|
#6
|
||||
|
||||
Hi Jon what would you use to pull the vaccum? And how do you tell the resin is fully penetrated in the wood? This whole process is fascinating to me.
__________________ Barry Clodfelter Proud member of PETA....People Eating Tasty Animals There is a place for all of God's creatures...right next to the mashed potatoes and gravy! |
#7
|
||||
|
||||
Yes A 6in would due , so where do you find the glass then ?
Sam __________________ R. Yates 13 & On Forge Live and Let Live , Do Not trespass on Life or Me! As we are not so kind or forgiving ! |
#8
|
|||
|
|||
I have a company in canada that makes them for me.
Jon |
#9
|
|||
|
|||
Barry we use 2 stage vacuum pumps to pull vacuum on chambers with the see thru chambers you can see that when all the air stops coming out of wood under full vacuum you bleed off vacuum and then the resin gets forced in to wood, some say that you can remove wood in 15 min but I?m a guy that will let mine sit and soak 2 hrs up to 1 week if I don?t have time to cure them, I firmly believe that if it takes a vacuum pump 1 hour to get the air out of the wood I have a hard time believing that it will drive the resin in to the wood in 15 min, there are many chamber makers out there that wants you not to soak you re wood for a long time due to hazing of the materials that the chambers are made from, as far as penetration if you are pulling good vacuum and have removed all air from wood and are using the correct resin the penetration is very good with no issues, the way you can tell if you are getting full penetration is cut the blank open and you will be able to see the results.
|
#10
|
|||
|
|||
still available
Im looking for a vacuum chamber other than the pickle jar im using now for knife and wood turning blanks do you still make these for sale?
|
Tags |
bee, blanks, cleaning, easy, for sale, knife, made, make, materials, resin, stabilizing, wood, woods |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
vacuum chambers | Don Halter | Knife Making Discussions | 16 | 11-21-2005 09:23 AM |
? glass: | snowblade | The Newbies Arena | 3 | 07-30-2005 12:35 AM |
Glass Knife | flisk | The Display Case | 8 | 05-19-2005 11:01 PM |
Vacume Chambers | DiamondG Knives | Tool Time | 6 | 11-27-2002 10:22 AM |
Bladesmiths Under Glass | prizzim | The Outpost | 42 | 07-27-2002 08:23 AM |