MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Knife Making Discussions > The Newbies Arena

The Newbies Arena Are you new to knife making? Here is all the help you will need.

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 10-14-2001, 01:53 AM
MIKE KOLLER
Guest
 
Posts: n/a
tips for a newbie from a newbie


If I was to give any advice to a new maker or someone that wanted to start making knives I believe it would have to be as follows:

Go to as many shows as you can, talk with the makers, look at their knives, but remember that they are there to sell, so dont interfere with it. This will give you a good idea of what the size and proportions of the knives are. Ask questions.
Do not be afraid to ask questions! Many aspects of knife making are extremely dangerous to life and limbs. There is too much knowledge out there being shared to take unnecessary risks.

Find out what products are recommended for value and reputation, it is more cost effective to go ahead and buy a machine/supplies that is versatile/enduring then to buy three of four of something that it takes to do the same job. Again ask questions.

Pick a steel. 0-1 is forgiving for grinding and 5160 is highly recommended for forging. I recommend them because the heat-treating process is a very important part of all this, and it lets you know how far you can take a blade before hand and still have a serviceable piece of steel when done. The above steels can be heat-treated relatively easy, but does not take away from the fact that when done right, they can offer superb blades. Practice and discover what you can make happen to that steel. Be safe. Practice more.

Remember that it has taken many makers years to get to where there are at now. Many have buckets full of blades and some completed knives that will never be seen by the general public. Having problems making that steel move like you want, ask questions. Dont be afraid to say what if I did this instead, but always remember that one way is not always the only way. More practice and more questions.

If you havent lost enough sleep yet start thinking about making Damascus/pattern welded blades and all the different ways to go about it, almost a guarantee to get you awake and cause your mind to drift will working at the regular JOB.
Have fun and learn from each knife or attempt at each knife and strive to make the next one a little better. Also, as many will tell you keep that first knife you will wish you had.

Be warned as of now there is only one cure for this addiction, death! But there again there is fire below and heaven has to have an awesome knife shop.

Be safe, have fun and& YES! ASK QUESTIONS!!!!! AND PRACTICE!!!

if any others have any suggestions please add them

Reply With Quote
 

Tags
blade, forging, knife, knife making, knives


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

(View-All Members who have read this thread : 6
Dionysus, Hotled, J.Babody, LANDERDC, warren, wayne r
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 10:01 PM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved