MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Knife Making Discussions > The Newbies Arena

The Newbies Arena Are you new to knife making? Here is all the help you will need.

Reply
 
Thread Tools Display Modes
  #16  
Old 05-10-2013, 02:16 PM
Walt-'s Avatar
Walt- Walt- is offline
Steel Addict
 
Join Date: May 2013
Location: Dayton, Ohio
Posts: 214
I sanded to 400 grit before heat treating based on the idea that I thought it would be easier to sand metal that was not hardened.


__________________
Walt
Reply With Quote
  #17  
Old 05-12-2013, 06:56 PM
WynnKnives's Avatar
WynnKnives WynnKnives is offline
Steel Addict
 
Join Date: Apr 2012
Location: Wooster, Ohio
Posts: 242
I usually take mine to 320 before HT, I used to go higher, but I always had to drop back down below 320 anyways, so I didn't waste paper. Also when I hand sand I really like using tap magic(cutting oil) it really speads up the process and makes great lines.
Reply With Quote
  #18  
Old 05-12-2013, 08:46 PM
Walt-'s Avatar
Walt- Walt- is offline
Steel Addict
 
Join Date: May 2013
Location: Dayton, Ohio
Posts: 214
320 grit before HT, Cutting oil....... Got it.

Thank you


__________________
Walt
Reply With Quote
  #19  
Old 05-13-2013, 02:31 PM
Austin Cutlery's Avatar
Austin Cutlery Austin Cutlery is offline
Enthusiast
 
Join Date: Mar 2013
Location: Oklahoma
Posts: 31
Quote:
Originally Posted by Doug Lester View Post
Sand paper with oil is more polishing than grinding. I grid out to 600 grit with 3M micron belts and either go to a Scot-Brite belt for a satin finish or, if I'm going to etch, I start hand sanding with 600 grit emory paper and WD-40 and continue out to 1500 grit.

As far as getting the crud off I quench the blade in oil then let it cool at least until just slightly warm to allow conversion to martensite to complete and then scrub with a brass brush and detergent before sticking it in the oven. It helps not to bake the crud onto the blade.

Doug
you like wd-40 better than oil or water? why?


__________________
Shawn...
Reply With Quote
  #20  
Old 02-23-2021, 05:32 AM
claramax600 claramax600 is offline
 
Join Date: Feb 2021
Posts: 4
Have you ever used detergent strips to clean your blade? My hubby uses it and after use it and clear with clothes its blade get much shine and clean, He got these strips from Tru Earth Coupons, if you wanna buy, you can check on there, hope it will work for you too.
Reply With Quote
Reply

Tags
1084, back, blade, blades, cleaning, files, forge, grinding, handle, heat, heat treat, hot, knife, make, making, material, polish, post, quenched, sand, stainless, steel, tools, white


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
First Heat Treatment SharpEdge0913 The Newbies Arena 4 05-23-2012 10:14 PM
Heat Treatment of D-7 joe sangster Heat Treating and Metallurgy 11 03-02-2007 12:01 PM
Basic heat treatment and cryogenic treatment of air hardening steels Don Robinson Knife Making Courses & Class Schedule 0 12-09-2005 08:38 PM
RWL-34 heat treatment andy gascoigne The Newbies Arena 9 01-19-2003 12:09 PM
3V heat treatment dcv High-Performance Blades 2 08-23-2002 07:27 AM


All times are GMT -5. The time now is 01:34 AM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved