|
|
The Folding Knife (& Switchblade) Forum The materials, techniques and the designing of folding knives. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
converting a DDR3BL TU AUTO.
Are there any instructions for converting a knifekits DDR3BL to an automatic?
Video?, photos? Discussions? TXS |
#2
|
||||
|
||||
There were some discussions around here when the knife first came out. You might try doing a search. To be honest, it's a pretty obvious modification once you look at the kit.
__________________ God bless Texas! Now let's secede!! |
#3
|
|||
|
|||
Thanks, I fitted everythingup, ceramic stone polished all the bearing surfaces, put it together without the spring, lock worked,blade opened and closed fine.
Then I took it all apart, fitted the spring,etc. Then I put the blade on the pivot and spring, when I tried to preload the spring, when I got the blade around to about 90 degrees, the spring deformed, made a really nice egg shape in the spring, and the spring also deformed up and moved the blade about 3/16th up. Does anybody have any suggestions? Does anybody have lock designs that do not take a CNC machine to build them? Txs, |
Tags |
auto, automatic, bearing, blade, build, cnc, kit, knife, lock, made, pivot, stone, switchblade |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Converting the garage | Drac | The Newbies Arena | 19 | 06-18-2012 07:16 AM |
Converting A Bandsaw | Mr Mike | Tool Time | 20 | 04-01-2009 11:34 AM |
Converting to Belt | Toolman | Tool Time | 9 | 08-07-2003 10:20 AM |
Converting a bandsaw | jdlange | Tool Time | 9 | 11-15-2002 09:02 PM |
Converting a log splitter to a press? | pupandcat | Tool Time | 1 | 04-24-2002 12:24 PM |