MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Knife Making Discussions

Knife Making Discussions A place to discuss issues related to all aspects of the custom knifemaking community.

Reply
 
Thread Tools Display Modes
  #1  
Old 06-03-2013, 08:38 PM
Richarpo Richarpo is offline
Member
 
Join Date: Dec 2011
Location: Niagara Falls NY
Posts: 10
Sodering Guards

I wanted to share a trick that has helped me in avoiding flux etching when using a torch to solder a guard to the blade. I use stainless for guards so this is what I have experience with.
I never could get the hang of a heat gun and this may not be necessary if you use that method. I use stay bright solder and flux and would have an occasional etch on the blade when the calgon heat paste I use to keep the blade cool would lift slightly. I use a black sharpie permanent marker to coat the blade where i do not want any flux to splash. I coat the blade from about 3/16" from the face of the guard. up the blade about an inch.The marker does not seem to want to run when heated to contaminate the joint but make sure you stay far enough away to avoid any problems. Clean with solvent or simply buff off.

Anyway its cheaper than anti-flux and I hope this helps anyone who has had similar problems. Good Luck Rich
Reply With Quote
Reply

Tags
blade, coat, etching, guard, guards, heat, knife, make, solder, stainless


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Guards......and more guards............ Mace Knife Making Discussions 8 04-15-2005 01:11 PM
How Do You Do Your Guards??? DiamondG Knives The Newbies Arena 15 03-29-2005 12:08 PM
guards? doublearrow The Newbies Arena 9 04-18-2003 12:33 PM
What do you think of guards Alex Cole The Newbies Arena 6 02-12-2003 11:45 PM
guards robertwashburn Ed Caffrey's Workshop 2 05-07-2002 03:55 PM


All times are GMT -5. The time now is 11:12 PM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved