|
|
The Newbies Arena Are you new to knife making? Here is all the help you will need. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
satanite
how much satanite is required to coat the wool in a 14X 22 inch forge body. i'm not looking for an exact amount , just an idea.
|
#2
|
||||
|
||||
Send Darren Ellis an email. He could get you pretty close. Wish I could be more help but Darren would be one of the best to ask.
Shane |
#3
|
|||
|
|||
I think that a couple of pounds at the most would do the trick. I made a paint can heat treat forge and mixed maybe a third of the five pound container that I bought and that was three or four times more than I needed to coat the inswool for mine. Hope this helps.
|
#4
|
||||
|
||||
Mix up about a cup full. Paint on. If you need more, mix up a little more.
__________________ "Many are chosen, but few are Pict" "The doer alone, learneth" NT Neo-Devo |
Tags |
forge |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|