|
|
The Supply Center What's Hot ... and where the deals are! Supplies are our specialty ... |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
horse stall matt for handles
I have horse stall mat that I have cut into 3/4"X5.5"x12" pieces.I bought a 4'x6' sheet that I'll never use all of it so if you want some i can send it in flat rate boxes for $9.80 plus $1 per piece with as many as 8 pieces in a box. I 'm not making any money but would like to know what you think of this type as is or compared to what you have used before. If you want to know more about the product their web sight is www.redbarnmats.com. send me an e-mail if you want some and we'll get it going. Thanks Larry
|
#2
|
|||
|
|||
Hi Larry,
I just sent you and email/PM. Mike |
#3
|
|||
|
|||
Got mine in the mail yesterday. Thanks. I'll let you know when I use some of it.
Thanks again, SDS |
#4
|
|||
|
|||
Larry, i used some of the mat as pads in my knife vises.....they work great ...IT doesn't scratch the blades and it holds them very firm.........Also it works great as a table top to do leather work on...................Have a great day...........carl
__________________ carl |
#5
|
|||
|
|||
combs,
Good ones thanks for the tips. |
#6
|
||||
|
||||
rubber matts
Quote:
THANKS Larry, got them in the mail this afternoon, I'm in the process of forging a camp knife and plan on using them so I'll let ya know how they work out, thanks again.......D.M.C. |
#7
|
||||
|
||||
working with stallmatt
the best way i found to cut was with my table saw after that my band saw,did some test glues contact cement(not so good ) marine goop(fair)silicoln(no good)acuglass(the best)
belt sander worked fine for shaping,sandpaper smothed out well.here's some pic's |
#8
|
||||
|
||||
stallmatt
more pic's.
note to all----the grip you get is non slip even wet, I put groove lines in but not nesisary for grip...with the acu-glas probly didn't even need the pins..thanks for looking..D.M.C. Last edited by MACLEOD; 11-16-2008 at 03:48 PM. Reason: note |
Tags |
forging, knife |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|