MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Knife Making Discussions > The Folding Knife (& Switchblade) Forum

The Folding Knife (& Switchblade) Forum The materials, techniques and the designing of folding knives.

Reply
 
Thread Tools Display Modes
  #1  
Old 01-10-2019, 11:30 AM
Don Robinson's Avatar
Don Robinson Don Robinson is offline
Moderator
 
Join Date: Jan 2003
Location: Brownsville, Texas
Posts: 4,868
Unhappy Wish this thread was still active

I enjoyed many years of activity on this forum.

I still check it every day to see if there has been a new post...?

I am willing to help anyone if I can. And I certainly can!

Let's see if we can get some old guys to participate again, then maybe we can get the Folding Knife forum started again.

Alex, can you help?
Reply With Quote
  #2  
Old 01-11-2019, 03:03 PM
M&J's Avatar
M&J M&J is offline
Skilled
 
Join Date: Dec 2004
Location: So. Cal
Posts: 380
Wish we had more participation too. Many other forums the activity has declined as well. Was looking at the forum stats here the other afternoon. The forum does pull in a good amount of guest viewers so the content is being taken in-seen.

Had a similar discussion at the Cal Custom Show discussing maker exposure though web page, forum, social media and traditional advertising. Those implementing the social media side can reach a vast amount interested people. They can promote sales and get help pretty quickly due to the cell phone culture.

Enough are content to lurk too. For common encounters, past discussions provide the necessary info too. I had been looking for info on one forum and I was able to find the answers from past threads discussing the subject. On one forum the common threads are merged together as DIY posts. (Even better when they have step-by-step pics) These are culled into a FAQ for viewers to find the appropriate info. Those threads get plenty of views.

Areas such as handle fitting, blade finishing, drill-tap, etc. You Tube is also a competitor in that regard too.


__________________
Mike
Reply With Quote
  #3  
Old 01-12-2019, 10:01 AM
Don Robinson's Avatar
Don Robinson Don Robinson is offline
Moderator
 
Join Date: Jan 2003
Location: Brownsville, Texas
Posts: 4,868
Thanks, Mike. I realize you are right about people using social media nowadays.

Too bad, I got such pleasure here reading new AND old posts and talking back and forth.

Well, que sera, sera.
Reply With Quote
  #4  
Old 01-12-2019, 10:04 AM
Don Robinson's Avatar
Don Robinson Don Robinson is offline
Moderator
 
Join Date: Jan 2003
Location: Brownsville, Texas
Posts: 4,868
I used to enjoy answering questions, helping, and posting pictures.
Reply With Quote
  #5  
Old 01-12-2019, 02:02 PM
jimmontg jimmontg is offline
Guru
 
Join Date: Jan 2016
Location: Now live in Las Cruces NM.
Posts: 1,141
I know how you feel Jon.

I enjoy participating and helping to answer questions and getting some of my questions answered, I certainly have learned a thing or two here. Still it is hard to compete with YouTube how-to videos, though I sometimes get the desire to tell some of those wahoos that heat treating O1 in a coffee can forge is not the best way to do it. Especially the ones who are using the platform to sell their wares. If I make them angry they just delete my comments. No discussion allowed.

I've seen some poor workmanship pawned off as the best way to do it. I told them it was the wrong way nicely too, but then was told I don't know what I'm talking about and then had my comments deleted when I showed I did know what I was talking about and said they were not craftsmen.
Some are open to correction though and that's who I watch. I've noticed the leather side is more open to though.
Reply With Quote
  #6  
Old 01-12-2019, 02:15 PM
M&J's Avatar
M&J M&J is offline
Skilled
 
Join Date: Dec 2004
Location: So. Cal
Posts: 380
I enjoy the discussion too. The newcomers that are interested this is nice to be able to interact.

I have a hard time glaring at a cell phone sized screen and tapping messages in can be challenging. The verbal translation has become quite good that tapping a virtual keyboard isn't necessary. However, punctuation and the resulting message can be a wall of text. A picture or seeing the details in a video can be challenging to discern on those devices. Especially for detail work as we have with making knives.

Last night I was attempting to get my pictures in the clear so that non-registered readers can see them. Instead of being able to easily get the image location from my hosting site, it inserts additional coding that isn't viewable outside resulting in a 404 error. Old images linked before the change still work but new ones I could not get to show. My task for today is figure out why that is happening. Knifenetwork is white list for hotlink protection but it is something else.

Still areas that I want to refine so that I'm efficient when working away. I'll be asking questions.


__________________
Mike
Reply With Quote
  #7  
Old 01-15-2019, 01:40 AM
TexasJack's Avatar
TexasJack TexasJack is offline
Super Moderator
 
Join Date: Apr 2004
Location: Southeast Texas
Posts: 2,791
I don't know why the drop off in participation.

Hard to believe that you have Don Robinson available for advice - esp. on folders - and no one taking advantage of that!!


__________________
God bless Texas! Now let's secede!!
Reply With Quote
  #8  
Old 01-15-2019, 09:54 AM
Don Robinson's Avatar
Don Robinson Don Robinson is offline
Moderator
 
Join Date: Jan 2003
Location: Brownsville, Texas
Posts: 4,868
Thanks, TJ.

How y'all doing up there?
Reply With Quote
  #9  
Old 01-17-2019, 08:53 PM
T.WOLFE T.WOLFE is offline
Enthusiast
 
Join Date: Oct 2011
Location: Morrison, Okla
Posts: 81
Hello Don, just came back after. being gone for a couple years...I think the last time I was here , most of the old crowd had already.drifted away-kinda sad, there were (and I'm sure still are ) some great guys here. I'm going to make a few this year, then prob hang it up.Been having problems with the back and hands...guess being 77 yrs young might have something to do with it. Glad to see you're still kicking, amigo...Tom


__________________
country music's just a thing of the past in Nashville,Tennessee
they're playing hip-hop songs with a capital H,and rap with a capital C.
Reply With Quote
  #10  
Old 01-17-2019, 10:54 PM
TexasJack's Avatar
TexasJack TexasJack is offline
Super Moderator
 
Join Date: Apr 2004
Location: Southeast Texas
Posts: 2,791
Vertical and ventilating, Don! Doing OK, but nothing to write home about.


__________________
God bless Texas! Now let's secede!!
Reply With Quote
  #11  
Old 01-18-2019, 10:00 AM
Don Robinson's Avatar
Don Robinson Don Robinson is offline
Moderator
 
Join Date: Jan 2003
Location: Brownsville, Texas
Posts: 4,868
Quote:
Originally Posted by T.WOLFE View Post
Hello Don, just came back after. being gone for a couple years...I think the last time I was here , most of the old crowd had already.drifted away-kinda sad, there were (and I'm sure still are ) some great guys here. I'm going to make a few this year, then prob hang it up.Been having problems with the back and hands...guess being 77 yrs young might have something to do with it. Glad to see you're still kicking, amigo...Tom
Wait 'till you're 84 like me....!???

I spend my time sleeping or painting using acrylics.
Reply With Quote
  #12  
Old Yesterday, 09:05 PM
M&J's Avatar
M&J M&J is offline
Skilled
 
Join Date: Dec 2004
Location: So. Cal
Posts: 380
I was teasing a buddy on his recent retirement from corporate life. He has squirrels in the yard so I mentioned to him that he can do things like this: :P

https://www.youtube.com/watch?v=DjCeHObR_xg


__________________
Mike
Reply With Quote
  #13  
Old Today, 01:23 AM
jimmontg jimmontg is offline
Guru
 
Join Date: Jan 2016
Location: Now live in Las Cruces NM.
Posts: 1,141
Michael the squirrel video was hilarious.

I wouldn't have been so kind. The gunshot blast alone would have scared them away period. But I'd have used a black powder charge underground that would blast them into little tree rat smithereens.

Last edited by jimmontg; Today at 01:54 AM. Reason: wording
Reply With Quote
Reply

Tags
a, back, bee, blade, ca, common, custom, diy, drill, folding, folding knife, forge, handle, heat, helping, home, knife, knives, leather, make, post, show, tap, traditional, web


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
This Group Still Active? RossA Texas Knifemakers and Collectors Association 5 10-07-2016 11:43 PM
Knives for Victory Auction (Oct) now active! Ed Caffrey Ed Caffrey's Workshop 0 10-08-2014 05:46 PM
Knives for Victory Auction (Oct) now active! Ed Caffrey Knives For Sale - Custom 0 10-08-2014 05:45 PM
A couple headed for active duty mkustom The Display Case 1 06-16-2010 05:23 PM
currently active user rhrocker Feature & Member Support 2 11-27-2004 06:17 PM


All times are GMT -5. The time now is 07:26 AM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved