MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Ed Caffrey's Workshop

Ed Caffrey's Workshop Talk to Ed Caffrey ... The Montana Bladesmith! Tips, tricks and more from an ABS Mastersmith.

Reply
 
Thread Tools Display Modes
  #1  
Old 06-03-2021, 03:45 PM
Ed Caffrey's Avatar
Ed Caffrey Ed Caffrey is offline
Super Moderator
 
Join Date: Jun 2002
Location: Great Falls, Montana, USA
Posts: 4,393
Send a message via AIM to Ed Caffrey Send a message via Yahoo to Ed Caffrey
Newly Completed for a Client

Just finished this one up for a Client. It's been a long time completing due to the ups and downs of my health..... but it sure does feel good to have it turn out so well through all the struggles!

Mosaic Damascus Blade, Sambar Stag handle, Bronze guard & buttcap.... both textured finish.
Blade is finished in satin clear Gun-Kote. Sheath of 8-9oz veg tanned leather with texturing.









__________________
WWW.CAFFREYKNIVES.NET

Caffreyknives@gmail.com

"Every CHOICE has a CONSEQUENCE, and all your CONSEQUENCES are a result of your CHOICES."
Reply With Quote
  #2  
Old 06-03-2021, 04:50 PM
bjmac bjmac is offline
Enthusiast
 
Join Date: Jul 2010
Location: WAY up northern CA
Posts: 32
Woo hoo, the master is in the house.
Reply With Quote
  #3  
Old 06-03-2021, 06:02 PM
KenH KenH is offline
Steel Addict
 
Join Date: Dec 2012
Location: South Baldwin Co across the bay from Mobile, AL
Posts: 129
Glad to see you posting, I was starting to worry about you.

That is a VERY impressive knife, and I'm liking the "museum fit" more as I look at it. Anyway you do it, natural material is going to move over time so the fit isn't perfect. The museum fit takes care of that.

That machine you've got really does some NICE stitching, and WOW - that Damascus pattern. VERY impressive. Is there a thread somewhere you tell about making that Mosaic pattern? If so, I'd sure like a link.
Reply With Quote
  #4  
Old 06-03-2021, 11:55 PM
TexasJack's Avatar
TexasJack TexasJack is offline
Super Moderator
 
Join Date: Apr 2004
Location: Southeast Texas
Posts: 2,922
Bronze guard and cap? Looks like silver in the photo.


__________________
God bless Texas! Now let's secede!!
Reply With Quote
  #5  
Old 06-04-2021, 12:49 AM
Gliden07 Gliden07 is offline
Member
 
Join Date: Apr 2021
Location: Western MA
Posts: 17
Ed what a Beautiful Heirloom!! How did you attach the butt cap? It looks like it's screwed on? I've done 1 antler handled knife and was at a quandary on how to finish the back off. Decided a butt cap and then went nuts figuring out how to attach it!
Reply With Quote
  #6  
Old 06-04-2021, 08:25 AM
Ed Caffrey's Avatar
Ed Caffrey Ed Caffrey is offline
Super Moderator
 
Join Date: Jun 2002
Location: Great Falls, Montana, USA
Posts: 4,393
Send a message via AIM to Ed Caffrey Send a message via Yahoo to Ed Caffrey
Quote:
Originally Posted by TexasJack View Post
Bronze guard and cap? Looks like silver in the photo.
Freshly polished. It'll take on the "rosy brown" tint all too soon.


__________________
WWW.CAFFREYKNIVES.NET

Caffreyknives@gmail.com

"Every CHOICE has a CONSEQUENCE, and all your CONSEQUENCES are a result of your CHOICES."
Reply With Quote
  #7  
Old 06-04-2021, 09:08 AM
Ed Caffrey's Avatar
Ed Caffrey Ed Caffrey is offline
Super Moderator
 
Join Date: Jun 2002
Location: Great Falls, Montana, USA
Posts: 4,393
Send a message via AIM to Ed Caffrey Send a message via Yahoo to Ed Caffrey
Quote:
Originally Posted by Gliden07 View Post
Ed what a Beautiful Heirloom!! How did you attach the butt cap? It looks like it's screwed on? I've done 1 antler handled knife and was at a quandary on how to finish the back off. Decided a butt cap and then went nuts figuring out how to attach it!
For hidden tangs that use a buttcap, I use a "clevis". Just recently I was telling my Pal Steve Kelly (owns and operates TiConnector.com) and he said.... "We can make super heavy duty versions of those"..... and he did!





Here's how I use them...(I don't have any good pics right now, but will get some later today).

Trim the hidden tang as necessary to length. Drill a #51 or #52 hole in the end of the tang (you want the 1/16" pin to have a loose fit through the tang for some "free play") Attach the body of the clevis to the tang, with a 1/16" hardened steel pin. Then fit things so the 4-40 screw is counterbored into the buttcap. The biggest "trick" is getting the screw lined up and started when you have the inside of the handle/tang full of glue! But if you're careful, slow, and deliberate, it's not hard. Some guys will know this from me talking about it elsewhere, but then I was using a commercial clevis that wasn't nearly as stout as these are.

As the pics say.... TiConnector.com has a limited number of them for sale. You need to email or call, because they are not shown on the website. Just ask for "Ed's Clevis". I believe they are around $6-7 each.... but not sure.


__________________
WWW.CAFFREYKNIVES.NET

Caffreyknives@gmail.com

"Every CHOICE has a CONSEQUENCE, and all your CONSEQUENCES are a result of your CHOICES."
Reply With Quote
  #8  
Old 06-04-2021, 04:32 PM
Chris Railey Chris Railey is offline
Enthusiast
 
Join Date: May 2021
Location: Waynesboro, Georgia
Posts: 60
Another hit Ed. Do you happen to have pictures of how you make your belt loop on the back of your sheath. I am constantly irritated when a knife sits too low on my belt and when I sit down the tip of the sheath impacts the seat and pushes the pommel up through my kidneys. I am currently working on a couple of solutions but there is no reason to re-invent the wheel if I do not need to.
By the way, I hate you are not at bladeshow this year I am driving up tomorrow to attend.
Reply With Quote
  #9  
Old 06-06-2021, 09:37 AM
Gliden07 Gliden07 is offline
Member
 
Join Date: Apr 2021
Location: Western MA
Posts: 17
Thank you Ed! I split the tang on mine and used a 6/32 screw that I took hours getting bend right to fit butt cap. Then I counter sunk a SS flush Allen key in it that had a threaded aluminum barreled spacer. It works but this would have been easier, quicker and stronger!
Reply With Quote
Reply

Tags
a, antler, back, bee, blade, damascus, damascus blade, finish, guard, gun, handle, how to, knife, leather, making, material, mosaic, pattern, photo, sheath, silver, stag, stag handle, tang, tanned leather


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Newly Completed for a Client Ed Caffrey The Display Case 1 06-03-2021 06:00 PM
Custom Design for a client muskrat man The Display Case 5 01-13-2008 01:01 PM
Newly finished knife & sheath joe sangster The Sheath/Holster Makers Forum 6 10-31-2006 09:29 PM
2 going out to a client Sean O'Hare The Display Case 4 01-17-2006 02:37 PM
A Pair of Newly Engraved Andy S Fine Embellishment 15 05-08-2005 08:35 PM


All times are GMT -5. The time now is 06:35 PM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved