|
|
Register | All Photos | FAQ | Members List | Calendar | ShopStream (Radio/TV) | Search | Today's Posts | Mark Forums Read |
The Newbies Arena Are you new to knife making? Here is all the help you will need. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Ceramic Rods
I got another question. I have a ceramic rod/tube that is about 30" long, has about !/8" thick walls and is 5/8" in diameter. I would like to cut it into three 10" lengths and put handles on them to use as honers. What do I use to cut the rod with? Thankz, TDK
|
#2
|
|||
|
|||
Try a dremmel tool with a diamond cut-off wheel.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|