MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Tool Time

Tool Time Let's talk shop. Equipment, Tips & Tricks, Safety issues - Post it here.

Reply
 
Thread Tools Display Modes
  #1  
Old 07-15-2023, 11:26 AM
larsonec larsonec is offline
Registered
 
Join Date: Jul 2023
Posts: 1
is there any hope for this grinder?




i inherited this grinder from my father and was hoping to use it for knife making. I can grind the bevel on one side of the blade but the switch and motor get in the way when working on the other side. I'd like to put a table on the front of the grinder but have no idea if this is possible or where to start with it. Any help is appreciated!
Reply With Quote
  #2  
Old 07-15-2023, 03:19 PM
M&J's Avatar
M&J M&J is offline
Master
 
Join Date: Dec 2004
Location: So. Cal
Posts: 913
Welcome!

Always hope and a way to adapt this into a machine that you can use. Sometimes it may takes some $ so depends what level of an investment you may be willing to undertake.

Can change the position of contact and other wheels, make up a different base to mount this on and so on. Using pulleys mounting a motor off this base will open up that one contact wheel. As this is configured it will do flat grinds too.

In search I found this place looking for various parts that can be adapted:
https://originblademaker.com/product...rinder-wheels/

They have a variety of parts that can be used in a conversion.


__________________
Mike
Reply With Quote
Reply

Tags
a, art, base, belt, bevel, blade, ca, conversion, flat, grinder, knife, knife making, make, making, motor, mount, switch, wheels


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
New Damascus...Hope you like it. jtippy The Display Case 0 07-26-2009 04:51 PM
There is hope!! Steve The S.R. "Steve" Johnson Forum 4 03-10-2007 03:40 PM
I done did it.. I hope it is right. Fsawyer Knife Network Community 9 02-08-2005 12:20 PM
Hope this works Steve Vanderkolff The Display Case 1 01-17-2002 08:38 PM
Hope you can help Redcharlie Knife Collecting 5 01-10-2002 02:08 PM


All times are GMT -5. The time now is 07:54 AM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved