monday afternoon was spent

[praktis]

this is how i spent some time monday afternoon,
grinding 2 blades one small damasteel 3 finger knife and a bigger fighter in A2
the small 3 finger knife is 6?" x 1,25" x 0.1" with a blade 3.3"long
it still needs to be drilld for pins and given a HT so i can etch the pattern properly.



the fighter is 270mm x 40mm x 6.5mm ( 10,6" x 1,6" x 1/4" )
the blade measures 146mm (5 3/4") measured diagonally from the tip to the plunge.

sitting here thinking about what scale material and pins to use.





i really need to get my lightbox made...

/Roger