MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Tool Time

Tool Time Let's talk shop. Equipment, Tips & Tricks, Safety issues - Post it here.

Reply
 
Thread Tools Display Modes
  #1  
Old 02-09-2001, 07:03 AM
Vaquero57
Guest
 
Posts: n/a
motor


Well I think after all this talk I may build a grinder. Just shut up and do it right. I have been back and forth between buying and building for over a month now. I am pretty handy there is no reason I can't build a good grinder more solidly than what I could spend the same amount on. I have a 2hp 3450 rpm motor. For simplicity reasons I wanted to build a direct drive. Buy with a pulley that has a bigger circumfrence than the shaft of the grinder say 4-5" won't that boost my belt speed higher than the rpm of the motor. I suppose I can't build one this way with the motor I got huh? It sounds complicated to try and machine a shaft with bearings for the step pulley design. It would be so much easier to just attach a pulley directly to the shaft. Cory
Reply With Quote
  #2  
Old 02-13-2001, 06:44 PM
Frank Niro
Guest
 
Posts: n/a

Hi it's me again Cory. I think I can help you with this direct drive pulley thing. With a constant speed machine I believe you should try to keep the speed below 3800 ft. per minute.This will probably help you with your grinding and finish as well. I believe your choice of the 2 hp. motor for flat grinding was a good one. A 4" drive wheel on a 3450 motor will give you just over 3600 ft. min.. I know this will work because I have used it for years and several makers I know are pleased that they have gone to this . The formula to use is 2x3.14x the radius of the drive wheel you think you may want to use divided by 12".
Reply With Quote
  #3  
Old 02-14-2001, 08:57 AM
Geno
Guest
 
Posts: n/a

Good advice Frank.
Cory - go for it. I would suggest a step pulley because of the fast motor. Most local knife supply centers will have the parts you need. (TKS, Jantz, Koval...)
Put it all together and brag a little.
If I can help in any way don't hesitate to call on me.
Reply With Quote
Reply

Tags
knife


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

(View-All Members who have read this thread : 0
There are no names to display.
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 03:11 PM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved