|
|
Register | All Photos | FAQ | Members List | Calendar | ShopStream (Radio/TV) | Search | Today's Posts | Mark Forums Read |
The Newbies Arena Are you new to knife making? Here is all the help you will need. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
what do you guys think of this skinner blade
Hi guys, i?d like to get your oppinions on the blade i?m working on att the moment.
it is 136mm X 42mm X 3.5 mm thick it is made of D2. i?ve taken it to 600 grit before heat treatment. __________________ Life is to short to own an ugly gun or knife. |
#2
|
||||
|
||||
I'm not sure anybody's opinion but yours and your customer's is really importantant at this point. Since you asked though, I think it looks very good at this stage. With noting to scale it against, I would imagine it's very small and a lot of people like a small skinner like that....
|
#3
|
|||
|
|||
praktis,
It looks like you're going to have a fine knife when it's finished. You might want to consider giving a skinner a little more belly to work with towards the tip. __________________ Everything you do says something about who and what you are so ALWAYS sign your work with excellence. You are cordially invited to check out my web site: Handmade Knives by Carey Quinn |
#4
|
|||
|
|||
I think it looks good. Post another picture when you're done.
|
#5
|
|||
|
|||
It is a nice piece... flowing lines. Post a pic when done..
|
Tags |
blade, knife |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|