|
|
|
|
|
|
||
|
|
|
|
||
|
|||||||
| Ed Caffrey's Workshop Talk to Ed Caffrey ... The Montana Bladesmith! Tips, tricks and more from an ABS Mastersmith. |
 |
|
|
Thread Tools | Display Modes |
|
#1
02-17-2004, 08:14 AM
|
||||
|
||||
|
HF surface grinder
Hi Ed. My HF surface grinder is due in this week. Bertie in Africa is making up the belt wheels for me. Should be up and going shortly
 Appreciate the help and info you've provided!
__________________ Robert Hensarling Uvalde, Texas  
|
|
#2
02-17-2004, 08:36 AM
|
||||
|
||||
|
ALRIGHT! New toys are always a good thing. Glad we could be of some help. Once you get the machine put together, post up some pics if you can. One thought......remember to level your chuck once you get everything set up. this can be done in two steps....... 1. Place a file on the mag chuck and turn on the machine without a belt. Just skim the wheel over the file enough to ensure the wheel is true. 2. Put a fine grit belt on the machine and lighly skim the mag chuck to ensure that it's true with the contact wheel. I failed to do this on my machine, and was all upset becasue the thing wasn't grinding level.............it was just my ignorance and lack of thought that was to blame.
__________________ WWW.CAFFREYKNIVES.NET  Caffreyknives@gmail.com "Every CHOICE has a CONSEQUENCE, and all your CONSEQUENCES are a result of your CHOICES."
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Thanks!
Linear Mode
