MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > KNet Classifieds :: For-Sale Forums > Knives For Sale - Custom

Knives For Sale - Custom Custom Knives for Sale (All Styles). These knives are offered by the individual sellers.

Reply
 
Thread Tools Display Modes
  #1  
Old 12-18-2018, 03:26 PM
saldash saldash is offline
Registered
 
Join Date: Dec 2018
Posts: 1
Question What's your suggestion on finishing this?


I've done it by laser cut till this point. What's your suggestion on its handle and blade. What about that bulged part that I think it may be good for the point finger to stay behind it and make's holding it better. Is it good or not? Thank you! Glad to I've goined this community.
Picture link: https://ibb.co/R4y4hdV

Last edited by saldash; 12-18-2018 at 03:30 PM.
Reply With Quote
  #2  
Old 12-18-2018, 04:09 PM
jimmontg jimmontg is offline
Guru
 
Join Date: Jan 2016
Location: Now live in Las Cruces NM.
Posts: 1,345
Looks like all you have is a profiled knife that needs to be ground on the outside to smooth out and you need to grind the knife bevels and drill the holes in the handle. In other words you need to do everything to it. I would start by marking where my bevels go, but I'm guessing you don't know how to grind the bevels?
Also what kind of steel is it? Since you laser cut it all the edges will be hard to a depth of a 64th inch or so which is why I said to grind the profile and smooth it out.

Last edited by jimmontg; 12-18-2018 at 04:12 PM.
Reply With Quote
Reply

Tags
art, blade, drill, grind, handle, how to, knife, make, making, marking, need help


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
new at knife making baddad The Display Case 13 12-15-2007 04:45 PM
Custom Knife in the Making - Cable Damascus No Hammer Marks V2 - Finished Knife ArielSalaverria The Display Case 2 08-31-2005 03:26 PM
Hello, I'm new to knife making BenMcDaniel The Newbies Arena 17 12-27-2001 09:42 PM


All times are GMT -5. The time now is 09:46 PM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved