MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Knife Organizations and Club Boards > Georgia Knifemaker's Guild

Georgia Knifemaker's Guild The Georgia Knifemaker's Guild. Furthering and fostering the passion of knives, knifemaking, and related interests

Reply
 
Thread Tools Display Modes
  #1  
Old 10-03-2007, 10:04 PM
Crex's Avatar
Crex Crex is offline
Moderator
 
Join Date: Sep 2002
Location: Acworth, GA and/or Hanging Dog, NC
Posts: 3,584
Great Southern Knife Show

Guild members:
The Guild is sponsoring a couple of tables to represent our organization at the show. Our banner will be displayed and informational flyers will be available. We would like any member who like, to display one of their knives on the table. You do not have to have a table at the show to participate. Please include contact information and/or table location with the knife so that interested parties can get in touch with you. Knives will not be priced or sold from this table - display only. You will be responsible for retreiving your knife at the end of the show. A guild member will be manning the table during show hours. We could use some volunteers to swap out a few hours at a time. Please let me know if you can help out.
Also the John Poythress Raffle Knife will be displayed on this table and tickets will be available. The drawing for this fine knife will be on Sunday afternoon prior to the closing of the show.

George Hancox is organizing the Hospitality Room and could use some help there as well.
Please step up and support your guild. Many hands makes light work. Help with clean-up on Sunday afternoon would be appreciated greatly.
Thanks in advance,
Carl Rechsteiner


__________________
Carl Rechsteiner, Bladesmith
Georgia Custom Knifemakers Guild, Charter Member
Knifemakers Guild, voting member
Registered Master Artist - GA Council for the Arts
C Rex Custom Knives

Blade Show Table 6-H
Reply With Quote
  #2  
Old 10-04-2007, 12:36 PM
RandyScott RandyScott is offline
Moderator
 
Join Date: Nov 2006
Location: Atlanta metro area (Sugar Hill)
Posts: 266
Carl & George,

I can help Sat and/or Sunday.

Randy
Reply With Quote
  #3  
Old 10-04-2007, 12:44 PM
Harry Mathews's Avatar
Harry Mathews Harry Mathews is offline
Skilled
 
Join Date: Nov 2004
Location: SE Georgia
Posts: 673
Carl,
Charlie and I will help out both Sat and Sun. We have already gotten our marching orders from George.


__________________
Harry Mathews
Twin Blades
www.twinxblades.com
Reply With Quote
  #4  
Old 10-04-2007, 03:15 PM
Carey Quinn Carey Quinn is offline
Skilled
 
Join Date: Aug 2004
Location: Georgia (Texan by birth)
Posts: 433
Carl,

I hope to make it up on Sat. If I do, I'll be happy to help out for a while.

Carey


__________________
Everything you do says something about who and what you are so ALWAYS sign your work with excellence.

You are cordially invited to check out my web site:
Handmade Knives by Carey Quinn
Reply With Quote
  #5  
Old 10-04-2007, 09:53 PM
Crex's Avatar
Crex Crex is offline
Moderator
 
Join Date: Sep 2002
Location: Acworth, GA and/or Hanging Dog, NC
Posts: 3,584
Thanks guys. Don't forget a knife for the display table.
Harry & Charlie - either of you know the approximate size of the Guild banner?


__________________
Carl Rechsteiner, Bladesmith
Georgia Custom Knifemakers Guild, Charter Member
Knifemakers Guild, voting member
Registered Master Artist - GA Council for the Arts
C Rex Custom Knives

Blade Show Table 6-H
Reply With Quote
  #6  
Old 10-07-2007, 01:10 PM
first twin's Avatar
first twin first twin is offline
Steel Addict
 
Join Date: Feb 2005
Posts: 177
Carl, the guild banner is 71 inches long and 36 inches wide. Is there any time on Friday to set up for the show? Harry is going to provide a coffee pot and a volt meter. Is there any info on the infamous outlet?


__________________
Charlie
First Twin
Twin Blades
www.twinxblades.com
Director Knifemakers Guild

Reply With Quote
  #7  
Old 10-07-2007, 09:27 PM
Crex's Avatar
Crex Crex is offline
Moderator
 
Join Date: Sep 2002
Location: Acworth, GA and/or Hanging Dog, NC
Posts: 3,584
Charlie
Thanks for the measurements. I'll see what I can work up. It'd sure help to know where the table will be located.
I think that the building will be open between 5 and 8, but not sure. Might check with Jack Jackson to be sure. No statement in the show literature the sent me concerning this.
The outlet hasn't moved.


__________________
Carl Rechsteiner, Bladesmith
Georgia Custom Knifemakers Guild, Charter Member
Knifemakers Guild, voting member
Registered Master Artist - GA Council for the Arts
C Rex Custom Knives

Blade Show Table 6-H
Reply With Quote
  #8  
Old 10-09-2007, 09:06 PM
Wade Holloway Wade Holloway is offline
Skilled
 
Join Date: Jun 2007
Location: Runaway Bay, Texas
Posts: 664
Where is this knife show at? I remember a few people talking about a knife show at the Hammer-in. Is this anything like Blade? Is there any activites going on there? My wife is going to be out of town this weekend so it looks like I could go to it. Just need the info.
Reply With Quote
  #9  
Old 10-09-2007, 09:18 PM
Crex's Avatar
Crex Crex is offline
Moderator
 
Join Date: Sep 2002
Location: Acworth, GA and/or Hanging Dog, NC
Posts: 3,584
Wade
The show is at the Cobb Civic Center in Marietta. Ga. Three exits north of I-285 on I-75 (Clay Rd exit). Go west on Clay about 2 miles and it's on the left.
Not near as big as the Blade but it's all knives and supplies.
Lot of the guys you met at Trackrock will be there. Not any demos that I am aware of (city fire dept. put the thumb down on a forging demo I had planned for last year).
Brother Rick won't make it this time (durn it), but it's still a pretty good show.
Hunt me up and show me some finished product.


__________________
Carl Rechsteiner, Bladesmith
Georgia Custom Knifemakers Guild, Charter Member
Knifemakers Guild, voting member
Registered Master Artist - GA Council for the Arts
C Rex Custom Knives

Blade Show Table 6-H
Reply With Quote
  #10  
Old 10-10-2007, 07:28 AM
Wade Holloway Wade Holloway is offline
Skilled
 
Join Date: Jun 2007
Location: Runaway Bay, Texas
Posts: 664
Well I do not know if I will have any finished product to show you, but I am working on it. Time is always an issure here lately. I am planning on being there and by the way you mentioned before that you had some extra freon cans that you did not want. If you still have them I would like a couple. I have already sent an email to Ellis Knives on getting all the stuff for the inside of the forge. See what you started. See you Saturday.
Reply With Quote
  #11  
Old 10-10-2007, 10:05 AM
first twin's Avatar
first twin first twin is offline
Steel Addict
 
Join Date: Feb 2005
Posts: 177
Way to go Carl! Another innocent corrupted. It will be good to have a "heat and beater" in our neck of the woods. Wade, I hope you will stop by our table at the Show. We will have only a few knives, but both stock removal and a couple of forged ones. The show will be fun and a good chance to see what makers in Georgia are doing.


__________________
Charlie
First Twin
Twin Blades
www.twinxblades.com
Director Knifemakers Guild

Reply With Quote
  #12  
Old 10-10-2007, 09:02 PM
Crex's Avatar
Crex Crex is offline
Moderator
 
Join Date: Sep 2002
Location: Acworth, GA and/or Hanging Dog, NC
Posts: 3,584
Charlie,
This is just to easy. Bladesmithing appeals to the natural boy in all of us. Goes against the grain of what our parents pounded into us. Don't play with fire, don't play with sharp things, Quit beating on that and be quiet!
How can one not be drawn to the "forbidden"? Too much fun for just one guy so I have to draw others into the game. Just got to do it!


__________________
Carl Rechsteiner, Bladesmith
Georgia Custom Knifemakers Guild, Charter Member
Knifemakers Guild, voting member
Registered Master Artist - GA Council for the Arts
C Rex Custom Knives

Blade Show Table 6-H
Reply With Quote
Reply

Tags
blade, forge, forging, knife, knives


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 02:52 PM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved