MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Knife Making Discussions > The Newbies Arena

The Newbies Arena New to Knife Making? Here's all the help you need ...

Reply
 
Thread Tools Display Modes
  #1  
Old 09-13-2017, 06:15 AM
Rasmus Kristens Rasmus Kristens is offline
Enthusiast
 
Join Date: Jul 2014
Location: Denmark
Posts: 40
Electrical tape etch in blade?!

Hi all

I'm was working on one of my knifes and wanted to protect the finished blade while finishing up the handle.
I coated it in a generousamount of WD40 and wrap it in black electrical tape.

When i finshed my handle and removed the tape, it revealed som deep black areas on the blade.

It's not possible to polish the areas, and I can feel an actual depress in the steel.. It seems almost etched in to the blade.

I can uploade a picture later today.

Have anyone ever had this problem?

Rasmus
Reply With Quote
  #2  
Old 09-13-2017, 07:59 AM
Ed Caffrey's Avatar
Ed Caffrey Ed Caffrey is offline
Super Moderator
 
Join Date: Jun 2002
Location: Great Falls, Montana, USA
Posts: 4,203
Send a message via AIM to Ed Caffrey Send a message via Yahoo to Ed Caffrey
It's not uncommon. Sometimes it's caused by a corrosive adhesive on cheaper grade of electrical tape. Some tape adhesives react corrosively with WD-40.

In my early years of knifemaking I had a lot of this type of thing happen. Personally I never cover a blade anymore..... I've found it's best to just be cautious and take care not to damage a finished blade, versus dealing with the problems caused by attempting to protect a blade.


__________________




Caffreyknives@gmail.com
"Nobody cares what you know.....until they know you care."
See me at table 2Q at the Blade Show!
Reply With Quote
  #3  
Old 09-13-2017, 09:15 AM
Ray Rogers's Avatar
Ray Rogers Ray Rogers is offline
Founding Member / Moderator
 
Join Date: Jun 2002
Location: Wauconda, WA
Posts: 9,631
Apparently Ed has heard of using electrical tape for this purpose before but that's a new one for me. When the subject of taping a blade comes up 3M blue masking tape seems to be what most people use, it certainly is my choice. I've never had a problem with it. I'd go so far as to say that, for me at least, it would be 3M blue or nothing at all ....


__________________

Your question may already have been answered - try the Search button first!






Reply With Quote
  #4  
Old 09-13-2017, 12:13 PM
MVPeterson's Avatar
MVPeterson MVPeterson is offline
Steel Addict
 
Join Date: Dec 2013
Location: Logandale, Nevada
Posts: 210
I wrap blade with Saran Wrap first, then tape.
Reply With Quote
  #5  
Old 09-13-2017, 12:34 PM
jimmontg jimmontg is offline
Master
 
Join Date: Jan 2016
Location: Now live in Las Cruces NM.
Posts: 952
I wrap like Mark does with plastic wrap, it also makes it easier to remove. It is the method I also use when forming veg tanned leather into a sheath for hi-carbon steels so they don't rust.
Reply With Quote
  #6  
Old 09-13-2017, 01:36 PM
dtec1 dtec1 is offline
Guru
 
Join Date: Aug 2015
Location: putnam county NY ....about 45 mins north of new york city
Posts: 1,310
I use the same as ray blue painter tape
Reply With Quote
  #7  
Old 09-13-2017, 02:27 PM
Rasmus Kristens Rasmus Kristens is offline
Enthusiast
 
Join Date: Jul 2014
Location: Denmark
Posts: 40
Well i will do that from now on. To bad i learned the hard way, but thats life for you ;-)
Thanks for the info.
Reply With Quote
  #8  
Old 09-13-2017, 04:53 PM
epicfail48 epicfail48 is offline
Enthusiast
 
Join Date: Aug 2017
Location: Springfield Mo
Posts: 31
Never much liked using electrical or duct tape on metals. Both types always seem to leave a pretty nasty residue or discoloration on the blade, never had it etch though. I like masking tape. Generous coating of oil on the blade, good wrap of masking tape. Protects it from scratches when putting the handles on and come off clean
Reply With Quote
  #9  
Old 09-14-2017, 09:15 AM
dtec1 dtec1 is offline
Guru
 
Join Date: Aug 2015
Location: putnam county NY ....about 45 mins north of new york city
Posts: 1,310
Same thing here a heavy tape like duct tape electrical tape has a lot of adheasive on it....that you would need to clean off with something like acetone. with masking tape there is no where near as much adheasive most of the time it comes off clean but sometimes if you leave it on for a while or you really press it on the the blade it might leave a LITTLE adhesive a lil acetone on a paper towel or micro fiber cloth it wipes right of in one or 2 swipes something like duct tape you need to do more scrubbing to get it off OR just put the blade in a bucket of acetone...a minute or 2 it should wipe off very easily but if you let it soak for a while you wont even need to wipe it off the acetone will dissolve the adheasive after a while
Reply With Quote
Reply

Tags
adhesive, blade, carbon, clean, common, electrical, etch, etched, handle, handles, knife, knifemaking, leather, plastic, polish, press, problem, sheath, steel, tanned leather, tap, wrap


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Best Book or Tape on Belt Grinding Mario DeAngelis Fit & Finish 5 10-13-2006 11:51 PM
DVD and Tape production steve ellsworth Fine Embellishment 8 03-05-2006 05:55 PM
Tape to make belts? floridafred The Supply Center 1 01-04-2003 12:25 AM
What tape? Cliff Krug Tool Time 8 08-26-2002 05:49 AM
Can't finde ferric chloride to etch blade dancbr929 The Newbies Arena 1 01-15-2002 09:16 PM


All times are GMT -5. The time now is 02:48 AM.




KNIFENETWORK.COM
Copyright © 2000
CKK Industries, Inc. All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved