MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Knife Making Discussions > Heat Treating and Metallurgy

Heat Treating and Metallurgy Discussion of heat treatment and metallurgy in knife making.

Reply
 
Thread Tools Display Modes
  #1  
Old 03-02-2016, 12:45 PM
Dave440c Dave440c is offline
 
Join Date: Jun 2015
Location: Pa
Posts: 2
Anneal ? yes or no

I feel I've made enough knives from files and leaf spring to start getting serious but now confused by a Walter Sorrels video . He makes a stock removal bush craft with 440c without annealing ... and also says it's good for the beginner doing stock removal but after reading comments from other experienced knife makers they claim it is a very difficult metal to temper etc... mainly my Q is do I need to anneal the steel bars sent from supplier ? I have 6 ft of 440c 3/16 x 1 1/2 .
Reply With Quote
  #2  
Old 03-03-2016, 05:47 AM
WBE WBE is offline
Skilled
 
Join Date: Feb 2009
Posts: 468
I don't know of any reason you need to anneal 440-C. I used it with stock removal in the late seventies and all through the eighties. I sent the blades to Paul Bos for HT and cryo treat. With cryo, it is a much better steel than it usually gets credit for. I never annealed it. Never knew any maker using it that did.
Reply With Quote
  #3  
Old 03-03-2016, 10:15 AM
samuraistuart samuraistuart is offline
Steel Addict
 
Join Date: Dec 2012
Location: San Antonio Texas
Posts: 135
Dave, you are correct. Steel received from a supplier, especially stuff like 440C, will come in the annealed condition. Do your shaping and grinding and then harden/temper.

You've been used to files and springs, which do need to be annealed before they can be worked, because they're already hard.
Reply With Quote
Reply

Tags
440c, art, bee, beginner, blades, craft, cryo, files, grinding, harden, knife, knives, made, makers, metal, steel, stock removal, temper, video


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Anneal Question mwhuston The Newbies Arena 8 12-01-2014 04:12 PM
Anneal ATS-34 Frank J Warner Heat Treating and Metallurgy 7 10-06-2008 01:19 PM
bronze anneal birdog4 Heat Treating and Metallurgy 2 02-18-2006 09:52 AM
anneal or not? Coutel Heat Treating and Metallurgy 6 07-20-2005 09:27 AM
anneal d2??? Cliff Krug Ed Caffrey's Workshop 5 09-28-2002 07:36 PM


All times are GMT -5. The time now is 07:39 PM.




KNIFENETWORK.COM
Copyright © 2000
CKK Industries, Inc. All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved