MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Knife Making Discussions > The Newbies Arena

The Newbies Arena Are you new to knife making? Here is all the help you will need.

Reply
 
Thread Tools Display Modes
  #1  
Old 03-16-2004, 04:02 AM
David Johansen's Avatar
David Johansen David Johansen is offline
Guru
 
Join Date: Dec 2003
Location: Logan, Utah
Posts: 1,027
2nd knife progress

I just thought I would post what I have ended up with (with a lot of help from many of you) right before I sent this off for heat treat. I did the profiling of the bevels with files and am very glad that part is done. Several coworkers wanted to see this and liked it so much that I have several orders for other types of knives. So I decided to get a 1X42 inch belt sander and I am in heaven. My next knife is already going tons faster. Just a side note I know that the small pin holes are not centered very well. Thanks heavens the two in the middle are much better and is what I will be using. Anyway please tell me what you think. I realize it is a poor picture and will post a better one when it is totally completed. Thanks for all the help and time saving ideas that got me to this point!!!
http://www.internetbusinesslinks.net..._before_HT.jpg

Last edited by David Johansen; 03-16-2004 at 04:05 AM.
Reply With Quote
  #2  
Old 03-16-2004, 04:08 AM
David Johansen's Avatar
David Johansen David Johansen is offline
Guru
 
Join Date: Dec 2003
Location: Logan, Utah
Posts: 1,027
I tried to post the picture instead of the link but always got the red X. I put the exact same link between the IMG tags so I don't know what I did wrong.

Also the knife is 1/4 inch 440 C Stainless. I am having it heat treated at Texas Knifemakers Supply. Thanks for looking!
Reply With Quote
  #3  
Old 03-16-2004, 08:32 AM
Jamey Saunders's Avatar
Jamey Saunders Jamey Saunders is offline
Moderator
 
Join Date: Jul 2002
Location: Portal, GA - If you know where it is, you probably got a speeding ticket.
Posts: 1,951
Send a message via AIM to Jamey Saunders Send a message via MSN to Jamey Saunders Send a message via Yahoo to Jamey Saunders
Hi David. What you'll want to do is go to your album and look just below the picture. There, you'll find the direct URL to the image. That's the URL you'll want to paste between the IMG tags. The URL you pasted was the URL to the album page, not the image. Try that and the picture should come up for you.


__________________
Jamey Saunders -- Charter Member, GCKG
(Got a question? Have you tried to for the answer?)

"I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people, and I require the same of them." --John Wayne, in The Shootist
Reply With Quote
  #4  
Old 03-16-2004, 12:18 PM
David Johansen's Avatar
David Johansen David Johansen is offline
Guru
 
Join Date: Dec 2003
Location: Logan, Utah
Posts: 1,027
Here is the picture

Thank you Jamey! That worked. Also one last note on the blade. It is double edged to where the top edge meets the strait part of the spine.
Reply With Quote
Reply

Tags
blade, knife, knives


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 12:52 AM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved