MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > The Sheath/Holster Makers Forum

The Sheath/Holster Makers Forum This is the place to discuss all forms of sheath and holster making.

Reply
 
Thread Tools Display Modes
  #1  
Old 01-13-2002, 01:59 PM
jar
Guest
 
Posts: n/a
Cross draw sheaths.


I have been looking for a source for cross draw sheaths. Often I'm wearing a pistol on my strong side so my knife goes on the weakside. While I can draw it with my left hand, I'd like to be able to use my right hand.

Do any of you offer your buyers a choice of getting two sheaths when they buy a knife, one for strong side and the other for weak side wear? If the sheath is a tooled presentation type, do you think the buyer would accept a plain working sheath as the second one? How much difference would it make in the price?
Reply With Quote
  #2  
Old 01-14-2002, 09:33 AM
helmar4578
Guest
 
Posts: n/a

jar---finding a maker for cross draw sheaths is no problem as their are many of us that are capable and willing to do so. The catch is to find a knifemaker that is willing to make two sheaths for one unsold knife. Underline that "unsold" as that is the key ingredient here. At this point the knifemaker does not know what the buyer has in mind for that knife as far as a carry system is concerned. Due to the fact that these will not be generic type sheaths, one can readily understand why the knifemaker would not be desirous of investing too much time, money, or effort in their construction. Having knives without sheaths is one thing, having sheaths without knives is a different game. How many buyers do you know who would buy a sheath and then look for a knife that would fit it? It is almost a "given" that the knifemaker will provide a sheath for most knives he sells but this is no indication that this sheath will be one that the buyer would have chosen, had he a choice! This is the reason there are custom sheath makers such as myself, Gary Graley,Kenny Rowe, Bob Schrap, to mention a few. You mentioned cost and this is a feature that is as varied as the pricing of knives, which can go from the sublime to the ridiculous. Do not expect a break in the price because you want "two" instead of "one". That would not qualify as wholesale. After all, you are talking two different patterns or designs here. My suggestion would be to find the knife you desire first and then make arrangements for the sheaths you want. You might have purchased the knife from a maker that can make you the outfit you want, if you are fortunate! Shop around!
Reply With Quote
  #3  
Old 01-14-2002, 09:43 AM
ansoknives
Guest
 
Posts: n/a

I would imagine that 1 sheath is enough.....on the right side it rides outside belt and on the left side it is turned so the back is out and the sheath is under the belt.....what do you think?
Reply With Quote
  #4  
Old 01-14-2002, 01:10 PM
MtMike
Guest
 
Posts: n/a

jar
there are several of us who do custom order work, just depends on exactly what you want. In some case it also depends on how long you're willing to wait, as someof the better known makers also have backlogs. Send me an email with your requirements (a pic of the knife would be helpful !) and I'll let you know what I could do for you. Crossdraws are becoming more popular for smaller to mid size blades, even horizontals for 3-4 inch pieces.
On your last post (snap-scratching) amen to everything posted. BUT sometimes security is a more important factor, and a snap is a good idea. But no good sheathmaker I know will leave the bare metal exposed to any part of the knife. email me at bartolm@earthlink.net.
MtMike
Reply With Quote
  #5  
Old 01-14-2002, 03:49 PM
DC KNIVES
Guest
 
Posts: n/a

jar,I've sold two sheaths with one knife before,several times.But as Sandy stated, it is usually when ordered that way.I'll make a field sheath and a dress sheath.Dave
Reply With Quote
Reply

Tags
knife, knives


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

(View-All Members who have read this thread : 0
There are no names to display.
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 06:21 PM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved