MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Factory Knife Customization & Mid-Tech Boards > Knife Kits Forum

Knife Kits Forum New to the art of knife making? Learn to make awesome knives, using advanced hands-on training inside. From KnifeKits.com.

Reply
 
Thread Tools Display Modes
  #1  
Old 07-12-2022, 02:29 PM
lppd4 lppd4 is offline
Member
 
Join Date: Nov 2016
Location: Deer Park, Texas
Posts: 13
preventing cross contamination

How do I prevent cross contamination when sanding handle material to a SS bolster for a seamless fit and feel. I have experienced this before and want to prevent it before I ruin some nice wood scales with black sanding or polishing residue. Any advice appreciated
Reply With Quote
  #2  
Old 07-13-2022, 02:57 PM
M&J's Avatar
M&J M&J is offline
Skilled
 
Join Date: Dec 2004
Location: So. Cal
Posts: 689
I was cleaning up some mammoth ivory scales after leveling the bolsters and it left all sorts of gray behind. I go back with a clean piece of abrasive to make sure the transition is smooth. Then to the buffer. The buffer alone will generally remove most the superficial steel residue. That's been my process to verify before buffing that the transition is leveled.

edit When you get the bolsters finished the way you like, taping them off and buffing the handle scales works too.


__________________
Mike

Last edited by M&J; 07-14-2022 at 05:16 PM.
Reply With Quote
Reply

Tags
abrasive, advice, back, bee, black, bolster, bolsters, buffer, cleaning, handle, handle material, ivory, make, mammoth, mammoth ivory, material, sanding, scales, steel, wood


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Pacific shock (Ethnic contamination) ziozeb The Display Case 4 02-19-2008 06:59 AM
Pacific shock (Ethnic contamination) ziozeb SBC Forum (Sociedade Brasileira de Cuteleiros) 4 02-18-2008 05:46 PM
Preventing Oxide layer during Heat Treating nate d. Heat Treating and Metallurgy 4 04-08-2006 08:17 AM
preventing back ache ? SVanderkolff Knife Making Discussions 10 02-05-2005 04:09 PM
Preventing warpage in heat treat Jason Cutter High-Performance Blades 21 12-16-2002 07:45 PM


All times are GMT -5. The time now is 05:16 PM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved