MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Knife Making Discussions > The Newbies Arena

The Newbies Arena Are you new to knife making? Here is all the help you will need.

Reply
 
Thread Tools Display Modes
  #1  
Old 10-26-2015, 11:10 AM
Tarella99 Tarella99 is offline
 
Join Date: Oct 2015
Location: Ontario Canada
Posts: 8
Merepx30

Has anyone used MEREPX30 for Mosiac pin making ? it seems a little move pricey but wonder if there is any pros and cons out there from using this .Not much info on it for pin making And hello i am new to forum and currently working on second knife a Damascus Steel Full Tang drop point .

Last edited by Tarella99; 10-26-2015 at 11:48 AM.
Reply With Quote
  #2  
Old 10-26-2015, 11:27 AM
Ray Rogers's Avatar
Ray Rogers Ray Rogers is offline
Founding Member / Moderator
 
Join Date: Jun 2002
Location: Wauconda, WA
Posts: 9,840
Never heard of it until you mentioned it. Googled it, looks like just another epoxy to me. I'm pretty sure the AcraGlas that many knife makers use is better but I don't see why MEREPX30 wouldn't work if you want to use it....


__________________

Your question may already have been answered - try the Search button first!






Reply With Quote
  #3  
Old 10-26-2015, 11:51 AM
Tarella99 Tarella99 is offline
 
Join Date: Oct 2015
Location: Ontario Canada
Posts: 8
Thanks maybe i will give it a shot see if there any benefits to using this a posed to using the one i am using i am currently using Devcon 30 min ..
Reply With Quote
  #4  
Old 10-26-2015, 11:54 AM
Tarella99 Tarella99 is offline
 
Join Date: Oct 2015
Location: Ontario Canada
Posts: 8
Is that the Acraglas gel that people are using ? Or the regular acraglas .Seems Us Knife makers is out of stock do you know of any other places to get it or is it a easy google search lol

Last edited by Tarella99; 10-26-2015 at 11:58 AM.
Reply With Quote
  #5  
Old 10-26-2015, 01:04 PM
Ray Rogers's Avatar
Ray Rogers Ray Rogers is offline
Founding Member / Moderator
 
Join Date: Jun 2002
Location: Wauconda, WA
Posts: 9,840
Most any epoxy will be better than Devcon 30 (of which I have used a lot).

The regular AcraGlas is preferred by most. Jantz usually has it, and Brownell's has it. The kit that sells for the same price as the MEREPX30 is good for quite a few knives. But, it has to be measured by volume. The easiest way to do that is with small syringes (you don't need the needles). Syringes are cheap, buy them at places that serve stock animals like feed stores and veterinary suppliers and possibly some of the better pet stores. Clean up with acetone and re-use the syringes ...


__________________

Your question may already have been answered - try the Search button first!






Reply With Quote
  #6  
Old 10-26-2015, 01:39 PM
Tarella99 Tarella99 is offline
 
Join Date: Oct 2015
Location: Ontario Canada
Posts: 8
i seem to be having a issue getting AcraGlas shipped to Canada Jantz and Brownells wont ship it .i`ll keep looking someone gotta have it ..
Reply With Quote
  #7  
Old 10-26-2015, 02:03 PM
Ray Rogers's Avatar
Ray Rogers Ray Rogers is offline
Founding Member / Moderator
 
Join Date: Jun 2002
Location: Wauconda, WA
Posts: 9,840
You should fill out your profile so that we know where you are. There are other makers in Canada that can usually help with this type of information if they can see you are in Canada ...


__________________

Your question may already have been answered - try the Search button first!






Reply With Quote
  #8  
Old 10-28-2015, 01:06 PM
DanCom's Avatar
DanCom DanCom is offline
Skilled
 
Join Date: Sep 2013
Location: Leduc County, Alberta, Canada
Posts: 314
Quote:
Originally Posted by Tarella99 View Post
i seem to be having a issue getting AcraGlas shipped to Canada Jantz and Brownells wont ship it .i`ll keep looking someone gotta have it ..
I get mine from a vendor on eBay. Ground shipping wasn't an issue for the three orders I have placed to date. In lieu of Acraglas, I have used West System's G/flex which is available at the marine shops at similar prices, less freight. The jury is still out, but by all accounts a very good product.

Dan
Reply With Quote
Reply

Tags
damascus, drop point, epoxy, full tang, kit, knife, knives, makers, making, mosiac pin, profile, small, steel, tang


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 12:02 AM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved